| Category | Items | Standard | ||
| 6TA | 6TB | 6TA- E | ||
| Product specification | Max. Axes group in system | 1 | 2 | 1 |
| Max. PLC axes group | — | 1 | — | |
| Standard controlled axes (standard) |
3 | 4 | 3 | |
| Max. controlled axes (option) | 3 | 4 | 4 | |
| Max. Number of spindles | 2 | 1 | ||
| Max. Axes in synchronous control (single axes group) | 3 | 4 | 3 | |
| Min. Control unit-mm | 0,0001 | 0,0001 | ||
| Max. Number of work coordinates system |
32 | 100 | ||
| Max. Groups of tool compensation | 96 | 32 | ||
| Number of multi-channel function groups | 4 | 4 | ||
| Number of pre-read segments | 64 | 1000 | ||
| Segment process time | 300 | 300 | ||
| Hardware specification | Storage DISKA (MB) | 256 | 512 | |
| I/O standard | 32/32 | 32/32 | ||
| I/O optional | None | — | ||
| DA | 2 | 2 | ||
| Display (Inch) | 8 | 8 | ||
| CF card | — | — | ||
| USB | 2 | 2 | ||
| RJ-45 | 1 | 1 | ||
| VGA output | — | — | ||
| PS/2 | — | — | ||
| RS-232 | — | — | ||
| RS-422 | — | — | ||
| RS-485 | 1 | 1 | ||
| USB | — | — | ||
| SRI | — | 1 | ||
| Servo control | General purpose (A/B phase) | O | — | |
| General purpose (CW/CCW) | O | — | ||
| Mechatrolink II | — | — | ||
| Mechatrolink III | — | O | ||
| EtherCAT | — | O | ||
| RTEX | — | O | ||
| Compensation | Back gap compensation | O | O | |
| Pitch error compensation | O | O | ||
| Spike compensation | O | O | ||
| Temp. Rise compensation | O | O | ||
| 2D compensation | O | O | ||
| Operation | Handwheel simulation | O | O | |
| Program empty run | O | O | ||
| Selective stop | O | O | ||
| Segment execution | O | O | ||
| Virtual handwheel | O | O | ||
| Pause point start | O | O | ||
| Tool interrupt point start | O | O | ||
| Tool retract | — | — | ||
| Offset setting | O | O | ||
| Handwheel offset function | — | — | ||
| Program input | Selective jump | O | O | |
| B-STOP/ program end | O | O | ||
| Absolute zero coordinates system (G92/G92.1) | O | O | ||
| Interrupt MACRO (M96/M97) | O | O | ||
| M 198 call subroutine | O | O | ||
| G-code extension | O | O | ||
| High speed high precision | Constant Jerk control | O | O | |
| Cross-segment S-curve acceleration/ deceleration | O | O | ||
| Auto deceleration at corner | O | O | ||
| Corner radius speed limit | O | O | ||
| Multiple high speed high precision parameter set |
— | — | ||
| User quick parameter | — | — | ||
| SPA function | — | — | ||
| Virtual circle radius function | O | O | ||
| High speed high precision control mode I (G05.1Q1) | — | — | ||
| High speed high precision control mode ii (G05P10000) | — | — | ||
| NURBS interpolation function | — | — | ||
| Tool management | Auto tool align screen | — | — | |
| Auto work measurement | O | O | ||
| Tool lifespan management | O | O | ||
| Auxiliary function | Mechanical lock (R-Bit) | O | O | |
| Software travel limit | O | O | ||
| Spindle speed detection | O | O | ||
| Axial coupling function | O | O | ||
| Axial dynamic coupling function | O | O | ||
| Feedback coupling function | O | O | ||
| Threading quick tool retract | O | O | ||
| Virtual axis function | O | O | ||
| Axle exchange function | O | O | ||
| Axial torque control | — | O | ||
| Serial adjustment function (CNC axis) | — | O | ||
| Driver data display (CNC axis) | — | O | ||
| Spindle adaptation function (CNC axis) |
— | O | ||
| Serial PLC axis | — | O | ||
| High speed spindle positioning (SYNTEC spindle required) | — | O | ||
| ROT element | — | O | ||
| Dipole foreground/ background configuration |
— | — | ||
| Data backup and recover | O | O | ||
| Start-up screen customization | O | O | ||
| My favorite (Only support ARM 8-key system) | — | O | ||
| Project protection function | O | O | ||
| Access management | O | O | ||
| Remote AP monitoring | O | O | ||
| Programming | Background edit | O | O | |
| Edit protection | O | O | ||
| Real time syntax check of processing program | O | O | ||
| PLC | PLC diagnosis function (FORCE I- point) |
— | O | |
| Data transfer function | NETWORK | O | O | |
| FTP | O | O | ||
| RS-485 | O | O | ||
| DNC(Network) | O | O | ||
| DNC(USB) | O | O | ||
| Data display | Operation history display | O | O | |
| Graphic simulation | O | O | ||
| Partial graphic simulation | O | O | ||
| Dynamic multi-language switch- over | — | O | ||
| G-code | Oval cutting (clockwise) (G02.1) | O | O | |
| Parabolic cutting (clockwise) (G02.2) | O | O | ||
| Cylinder interpolation (G07.1) | O | O | ||
| Start-up polar coordinates (G12.1) | O | O | ||
| OD/ID turning cycle (G20) | O | O | ||
| Threading cycle (G21) | O | O | ||
| Intermediate threading feed cycle (G21.2) | O | O | ||
| End face turning cycle (G24) | O | O | ||
| Jump function (G31) | O | O | ||
| Treading (G33) | O | O | ||
| Variable pitch threading (G34) | O | O | ||
| Polygon turning (G51.2) | O | O | ||
| Work coordinates system setting (G54~G59.9) | O | O | ||
| Mirror function (lathe) (G68) | O | O | ||
| Complex turning cycle (G72~G78) | O | O | ||
| Fixing cycle for drilling (G80, G83~G89) | O | O | ||
| Absolute zero coordinates system preset (G92.1) | O | O | ||
| Inverse time feed (G93) | — | — | ||
| Constant surface cutting speed (G96) | O | O | ||
| Spindle synchronization function (G114.1) | — | — | ||
| Spindle load function (G114.3) | — | — | ||
| Option | Option-4 Enable Plugin Function | O | O | |
| Option-11 High Precision Contour Control (HPCC) | ||||
| Option-12 Rotation Tool Center Point (RTCP) | ||||
| Option-13 Feature Coordinate System | ||||
| Option-14 Parameter learning function | ||||
| Option-15 Tapping Learning | ||||
| Option-16Syntec Vision | ||||
| Option-17 Commercial Vision Software | ||||
| Option-18 CAD/CAM | ||||
| Option-19 3D Arc Interpolation | ||||
| Option-20 Pick and Place (All in one) | Δ | |||
| Option-21 Four Axis Robot | ||||
| Option-22 Five Axis Robot | ||||
| Option-23 Six Axis Robot | ||||
| Option-24 Gantry Robot | Δ | |||
| Option-25 Advanced Look-Ahead | ||||
| Option-26 Smooth Tool Center Point(STCP) | ||||
| Option-27 Multiple mechanisms for five-axis | ||||
| Option-28 The 2nd coordinate supports feature coordinate system | ||||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | ||||
| Option-31 High Speed Chamfering Contour Control | ||||
| Option-32 ROT Servo Turret | Δ | |||
| Option-34 Wood Software | ||||
| Option-35 3D Laser Scanning | ||||
| Option-36 Wood Built-In CAM Function | ||||
* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half
O Standard function
△ Optional function
– Not available function
| Category | Items | Standard | ||
| 6TA | 6TB | 6TA- E | ||
| Product specification | Max. Axes group in system | 1 | 2 | 1 |
| Max. PLC axes group | — | 1 | — | |
| Standard controlled axes (standard) |
3 | 4 | 3 | |
| Max. controlled axes (option) | 3 | 4 | 4 | |
| Max. Number of spindles | 2 | 1 | ||
| Max. Axes in synchronous control (single axes group) | 3 | 4 | 3 | |
| Min. Control unit-mm | 0,0001 | 0,0001 | ||
| Max. Number of work coordinates system |
32 | 100 | ||
| Max. Groups of tool compensation | 96 | 32 | ||
| Number of multi-channel function groups | 4 | 4 | ||
| Number of pre-read segments | 64 | 1000 | ||
| Segment process time | 300 | 300 | ||
| Hardware specification | Storage DISKA (MB) | 256 | 512 | |
| I/O standard | 32/32 | 32/32 | ||
| I/O optional | None | — | ||
| DA | 2 | 2 | ||
| Display (Inch) | 8 | 8 | ||
| CF card | — | — | ||
| USB | 2 | 2 | ||
| RJ-45 | 1 | 1 | ||
| VGA output | — | — | ||
| PS/2 | — | — | ||
| RS-232 | — | — | ||
| RS-422 | — | — | ||
| RS-485 | 1 | 1 | ||
| USB | — | — | ||
| SRI | — | 1 | ||
| Servo control | General purpose (A/B phase) | O | — | |
| General purpose (CW/CCW) | O | — | ||
| Mechatrolink II | — | — | ||
| Mechatrolink III | — | O | ||
| EtherCAT | — | O | ||
| RTEX | — | O | ||
| Compensation | Back gap compensation | O | O | |
| Pitch error compensation | O | O | ||
| Spike compensation | O | O | ||
| Temp. Rise compensation | O | O | ||
| 2D compensation | O | O | ||
| Operation | Handwheel simulation | O | O | |
| Program empty run | O | O | ||
| Selective stop | O | O | ||
| Segment execution | O | O | ||
| Virtual handwheel | O | O | ||
| Pause point start | O | O | ||
| Tool interrupt point start | O | O | ||
| Tool retract | — | — | ||
| Offset setting | O | O | ||
| Handwheel offset function | — | — | ||
| Program input | Selective jump | O | O | |
| B-STOP/ program end | O | O | ||
| Absolute zero coordinates system (G92/G92.1) | O | O | ||
| Interrupt MACRO (M96/M97) | O | O | ||
| M 198 call subroutine | O | O | ||
| G-code extension | O | O | ||
| High speed high precision | Constant Jerk control | O | O | |
| Cross-segment S-curve acceleration/ deceleration | O | O | ||
| Auto deceleration at corner | O | O | ||
| Corner radius speed limit | O | O | ||
| Multiple high speed high precision parameter set |
— | — | ||
| User quick parameter | — | — | ||
| SPA function | — | — | ||
| Virtual circle radius function | O | O | ||
| High speed high precision control mode I (G05.1Q1) | — | — | ||
| High speed high precision control mode ii (G05P10000) | — | — | ||
| NURBS interpolation function | — | — | ||
| Tool management | Auto tool align screen | — | — | |
| Auto work measurement | O | O | ||
| Tool lifespan management | O | O | ||
| Auxiliary function | Mechanical lock (R-Bit) | O | O | |
| Software travel limit | O | O | ||
| Spindle speed detection | O | O | ||
| Axial coupling function | O | O | ||
| Axial dynamic coupling function | O | O | ||
| Feedback coupling function | O | O | ||
| Threading quick tool retract | O | O | ||
| Virtual axis function | O | O | ||
| Axle exchange function | O | O | ||
| Axial torque control | — | O | ||
| Serial adjustment function (CNC axis) | — | O | ||
| Driver data display (CNC axis) | — | O | ||
| Spindle adaptation function (CNC axis) |
— | O | ||
| Serial PLC axis | — | O | ||
| High speed spindle positioning (SYNTEC spindle required) | — | O | ||
| ROT element | — | O | ||
| Dipole foreground/ background configuration |
— | — | ||
| Data backup and recover | O | O | ||
| Start-up screen customization | O | O | ||
| My favorite (Only support ARM 8-key system) | — | O | ||
| Project protection function | O | O | ||
| Access management | O | O | ||
| Remote AP monitoring | O | O | ||
| Programming | Background edit | O | O | |
| Edit protection | O | O | ||
| Real time syntax check of processing program | O | O | ||
| PLC | PLC diagnosis function (FORCE I- point) |
— | O | |
| Data transfer function | NETWORK | O | O | |
| FTP | O | O | ||
| RS-485 | O | O | ||
| DNC(Network) | O | O | ||
| DNC(USB) | O | O | ||
| Data display | Operation history display | O | O | |
| Graphic simulation | O | O | ||
| Partial graphic simulation | O | O | ||
| Dynamic multi-language switch- over | — | O | ||
| G-code | Oval cutting (clockwise) (G02.1) | O | O | |
| Parabolic cutting (clockwise) (G02.2) | O | O | ||
| Cylinder interpolation (G07.1) | O | O | ||
| Start-up polar coordinates (G12.1) | O | O | ||
| OD/ID turning cycle (G20) | O | O | ||
| Threading cycle (G21) | O | O | ||
| Intermediate threading feed cycle (G21.2) | O | O | ||
| End face turning cycle (G24) | O | O | ||
| Jump function (G31) | O | O | ||
| Treading (G33) | O | O | ||
| Variable pitch threading (G34) | O | O | ||
| Polygon turning (G51.2) | O | O | ||
| Work coordinates system setting (G54~G59.9) | O | O | ||
| Mirror function (lathe) (G68) | O | O | ||
| Complex turning cycle (G72~G78) | O | O | ||
| Fixing cycle for drilling (G80, G83~G89) | O | O | ||
| Absolute zero coordinates system preset (G92.1) | O | O | ||
| Inverse time feed (G93) | — | — | ||
| Constant surface cutting speed (G96) | O | O | ||
| Spindle synchronization function (G114.1) | — | — | ||
| Spindle load function (G114.3) | — | — | ||
| Option | Option-4 Enable Plugin Function | O | O | |
| Option-11 High Precision Contour Control (HPCC) | ||||
| Option-12 Rotation Tool Center Point (RTCP) | ||||
| Option-13 Feature Coordinate System | ||||
| Option-14 Parameter learning function | ||||
| Option-15 Tapping Learning | ||||
| Option-16Syntec Vision | ||||
| Option-17 Commercial Vision Software | ||||
| Option-18 CAD/CAM | ||||
| Option-19 3D Arc Interpolation | ||||
| Option-20 Pick and Place (All in one) | Δ | |||
| Option-21 Four Axis Robot | ||||
| Option-22 Five Axis Robot | ||||
| Option-23 Six Axis Robot | ||||
| Option-24 Gantry Robot | Δ | |||
| Option-25 Advanced Look-Ahead | ||||
| Option-26 Smooth Tool Center Point(STCP) | ||||
| Option-27 Multiple mechanisms for five-axis | ||||
| Option-28 The 2nd coordinate supports feature coordinate system | ||||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | ||||
| Option-31 High Speed Chamfering Contour Control | ||||
| Option-32 ROT Servo Turret | Δ | |||
| Option-34 Wood Software | ||||
| Option-35 3D Laser Scanning | ||||
| Option-36 Wood Built-In CAM Function | ||||
* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half
O Standard function
△ Optional function
– Not available function
| 控制器類型 | 標準 | ||
| 6TA | 6TB | 6TA- E | |
| 軸數 | 3 | 4 | 3(4) |
| DA | 2 | ||
| 最大限度 I/O | 32/32 | ||
| 展示 | 8” | ||
| 通訊類型 | Pulse | M3/ECAT/RTEX | |
| VGA | – | ||
| 聯繫 | Ethernet RS485 | Ethernet RS485 SRI | |
| 多節目 | 1 | 1 | |
| 記憶 | 256MB | 512MB | |
| 斜面工藝 | – | ||
| HPCC | – | ||
* 僅後半部提供 VGA ○ 標準－ 不支援 △ 選修的
○ Tiêu chuẩn－ Không hỗ trợ △ Mở rộng
|
Sản phẩm |
||
| Model | 70CB-5 | 710CA |
| Số trục tiêu chuẩn | 5 | 4 |
| Số trục mở rộng | 18 | |
| Hệ thống Servo | Mechatrolink-III / EtherCAT | |
| Chuẩn truyền thông giao tiếp | RS485, ModbusTCP, EtherNet/IP | |
| Network | 10/100Mps | |
| External Interface | RJ-45, USB, DSUB, MPG | |
| USB | 2 | |
| Hiển thị | VGA | |
| I/O tối đa | 4096/4096 | |
| Nguồn cấp | DC24V 1A | |
○ Tiêu chuẩn－ Không hỗ trợ △ Mở rộng
|
Bảng thông số kỹ thuật |
|
| Model | 710SA |
| Giao diện điều khiển máy quét | XY2-100 |
| Giao diện nguồn laser | 25PIN |
| IO (tiêu chuẩn / mở rộng) | – / tối đa.4096I 4096O |
| Số trục điều khiển | Tiêu chuẩn 2 trục (tối đa.5 trục) |
| Loại truyền thông | EtherCAT |
| DA/AD | 2DA |
| Nguồn cấp | DC 24V 1A |
| USB | 2 |
| Chuẩn chia sẽ dữ liệu | LAN, USB, RS485 |
○ Tiêu chuẩn－ Không hỗ trợ △ Mở rộng
| Bảng thông số kỹ thuật | |
| Model | 720SA |
| Giao diện điều khiển máy quét | XY2-100 |
| Giao diện nguồn laser | 25PIN |
| IO (tiêu chuẩn / mở rộng) | 16I/8O (tối đa.4096I 4096O) |
| Số trục điều khiển | Tiêu chuẩn 1 trục (tối đa.5 trục) |
| Loại truyền thông | EtherCAT |
| DA/AD | 3DA/4AD |
| Nguồn cấp | DC 24V 1A |
| USB | 3 |
| Chuẩn chia sẽ dữ liệu | LAN, USB, RS485 |
○ Tiêu chuẩn－ Không hỗ trợ △ Mở rộng
| BẢNG THÔNG SỐ KỸ THUẬT | |
|---|---|
| Model | 730SA |
| Giao diện điều khiển máy quét | XY2-100 |
| Giao diện nguồn laser | 25PIN |
| IO(tiêu chuẩn/mở rộng) | 16I8O/tối đa.4096I4096O |
| Số trục điều khiển | Tiêu chuẩn 1 trục (tối đa 5 trục) |
| Kiểu truyền thông | EtherCAT |
| DA/AD | 3DA/4AD |
| Điện áp cấp | DC24V1A |
| USB | 3 |
| Kiểu chia sẽ dữ liệu | LAN,USB,RS485 |
| 控制器類型 | 6GB-G | 7GA | 22GA |
| 軸數 | 4 | 4(6) | 6(18) |
| DA | 2 | – | – |
| 主軸 | 2 | 6 | 10 |
| 最大輸入/輸出 | 32/32 | ||
| 展示 | 8” | 8” | 10.4” |
| 通訊類型 | Pulse | M3/EtherCAT | M3/EtherCAT |
| VGA | – | – | – |
| 聯繫 | Ethernet RS485 | ||
| 多程式 | 2 | 2 | 4 |
| 記憶 | 256MB | 4GB | 4GB |
○ 標準 － 不支援 △ 可選
| Model | Item | 7GA |
| Axis control | Standard. Axis | 4 |
| Max. Axis (Optional) | 6 | |
| Max. Spindle | 6 | |
| Axis group + PLC axis group | 2 | |
| Max. Simultaneous Axis Control | Single axis group | 4 |
| Hardware | Servo control | ECAT/RTEX/M3 |
| Standard I/O | 64/64 (RIO) | |
| Optional I/O | 128/128 | |
| DA | – | |
| Monitor (Inch) | 8″ | |
| DiskC | 4GB | |
| DiskA | 4GB | |
| Front interface | CF Card | – |
| USB | 2 | |
| Rear interface | RJ-45 | O |
| VGA | – | |
| RS-232 | – | |
| RS-422 | – | |
| RS-485 | O | |
| USB | – | |
| PS/2 | – | |
| KB | O | |
| HK | O | |
| 5V | O | |
| SRI | O |
O Standard function
△ Optional function
– Not available function
| Model | Item | 6GA-E | 21GA-E | 7GA | 22GA |
| Axis control | Standard. Axis | 4 | 6 | 4 | 6 |
| Max. Axis (Optional) | 6 | 18 | 6 | 18 | |
| Max. Spindle | 6 | 6 | 6 | 10 | |
| Axis group + PLC axis group | 2 | 4 | 2 | 4 | |
| Max. Simultaneous Axis Control | Single axis group | 4 | 4 | 4 | 4 |
| Hardware | Servo control | ECAT/RTEX/M3 | ECAT/RTEX/M3 | ECAT/RTEX/M3 | ECAT/RTEX/M3 |
| Standard I/O | 32/32 | 32/32 | 64/64 (RIO) | 64/64 (RIO) | |
| Optional I/O | 96/96 | 96/96 | 128/128 | 128/128 | |
| DA | 2 | 2 | – | – | |
| Monitor (Inch) | 8″ | 10.4″ | 8″ | 10.4″ | |
| DiskC | 4GB | 4GB | 4GB | 4GB | |
| DiskA | 4GB | 4GB | 4GB | 4GB | |
| Front interface | CF Card | – | – | – | – |
| USB | 2 | 2 | 2 | 2 | |
| Rear interface | RJ-45 | O | O | O | O |
| VGA | – | – | – | – | |
| RS-232 | – | – | – | – | |
| RS-422 | – | – | – | – | |
| RS-485 | O | O | O | O | |
| USB | – | – | – | – | |
| PS/2 | – | – | – | – | |
| KB | O | O | O | O | |
| HK | O | O | O | O | |
| 5V | O | O | O | O | |
| SRI | O | O | O | O | |
| Normal/HPCC | 1stCoord: 600/600 2ndCoord: 600/600 After opening OP31: 1stCoord: 1200/1200 2ndCoord: 1000/1000 |
1stCoord: 4000/4000 2~4Coord: 1000/1000 |
|||
| Standard features | 1. G5.1 2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 5. Multi-spindle simultaneous tapping 6. Axis exchange function 7. Overlapping 9. Single axis group five-axis simultaneous motion function |
2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 6. Axis exchange function 7. Overlapping 10. G120.1 multiple sets of processing conditions |
2. Simultaneous tapping 3. Fast transfer and fast attack 4. Tapping and quick retraction 6. Axis exchange function 7. Overlapping 10. G120.1 multiple sets of processing conditions 11. G81.1 Chopping |
||
| Option | Option-4 Enable Plugin Function | O | O | ||
| Option-11 High Precision Contour Control (HPCC) | O | O | |||
| Option-12 Rotation Tool Center Point (RTCP) | |||||
| Option-13 Feature Coordinate System | Δ | ||||
| Option-14 Parameter learning function | Δ | ||||
| Option-15 Tapping Learning | Δ | ||||
| Option-16Syntec Vision | Δ | Δ | |||
| Option-17 Commercial Vision Software | Δ | Δ | |||
| Option-18 CAD/CAM | Δ | Δ | |||
| Option-19 3D Arc Interpolation | Δ | ||||
| Option-20 Pick and Place (All in one) | Δ | Δ | |||
| Option-21 Four Axis Robot | Δ | Δ | |||
| Option-22 Five Axis Robot | Δ | Δ | |||
| Option-23 Six Axis Robot | Δ | Δ | |||
| Option-24 Gantry Robot | Δ | Δ | |||
| Option-25 Advanced Look-Ahead | Δ | ||||
| Option-26 Smooth Tool Center Point(STCP) | |||||
| Option-27 Multiple mechanisms for five-axis | Δ | ||||
| Option-28 The 2nd coordinate supports feature coordinate system | Δ | ||||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | |||||
| Option-31 High Speed Chamfering Contour Control | O | O | |||
| Option-32 ROT Servo Turret | Δ | Δ | |||
| Option-34 Wood Software | Δ | ||||
| Option-35 3D Laser Scanning | |||||
| Option-36 Wood Built-In CAM Function |
O Standard function
△ Optional function
– Not available function
