Hỗ Trợ
Author picture

Hiển thị 25–30 của 30 kết quả

  • 6MA-E, 6MB-E máy phay 3-5 trục dạng truyền thông

    Category Items Standard
    6MA 6MB 6MA-E 6MB-E
    Product Specification Max. PLC Controlled Paths 2 2
    Max. PLC Controlled Paths 1 1
    Standard Axis 3 4 3 4
    Max. Axis (Optional) 3 4 3 5
    Max. Spindle 1 2 3 4
    Max. Simultaneous Axis Control 3 4 4
    Min. Control (mm) 0,0001 0,0001
    Max. number of program coordinate 32 32
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 100 100
    Block Processing timT 300 600
    Hardware Specifications Storage DISKA (MB) 256 512
    Standard I/O 32/32 32/32
    Optional I/O ─ ─
    DA 2 2
    Monitor (Inch) 8 8
    CF Card ─ ─
    CF Card 2 2
    USB ─ ─
    RJ-45 1 1
    VGA Output ─ ─
    PS/2 ─ ─
    RS-232 ─ ─
    RS-422 ─ ─
    RS-485 1 1
    USB ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─
    Pulse Train (CW/CCW) O ─
    Mechatrolink II ─ ─
    Mechatrolink III ─ O
    EtherCAT ─ O
    RTEX ─ O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation ─ ─
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan ─ ─
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters ─ ─
    Quick Parameter Setup ─ ─
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) ─ O
    HSHP Control Mode I (G05.1 Q1) ─ ─
    HSHP Control Mode II (G05P10000) ─ ─
    NURBS Interpolation Ability ─ ─
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit ─ O
    Serial Bus Setting Feature(CNC Axis) ─ O
    Driver Information Display(CNC Axis) ─ O
    Spindle Application Feature(CNC Axis) ─ O
    Serial Bus PLC Axis ─ O
    ROT Element ─ O
    Dipole Front and Back System ─ ─
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) ─ ─
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) ─ O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch ─ O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ ─
    Feature Coordinate Teach ─ ─
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) ─ ─
    Smoothing Path Mode (G05.1) ─ ─
    NURBS Interpolation (G06.2) ─ ─
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) ─ ─
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) ─ O
    Option Option-4 Enable Plugin Function O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ
    Option-17 Commercial Vision Software Δ
    Option-18 CAD/CAM Δ
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control Δ
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6MA, 6MB máy phay 3-4 trục dạng xung

    Category Items Standard
    6MA 6MB 6MA-E 6MB-E
    Product Specification Max. PLC Controlled Paths 2 2
    Max. PLC Controlled Paths 1 1
    Standard Axis 3 4 3 4
    Max. Axis (Optional) 3 4 3 5
    Max. Spindle 1 2 3 4
    Max. Simultaneous Axis Control 3 4 4
    Min. Control (mm) 0,0001 0,0001
    Max. number of program coordinate 32 32
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 100 100
    Block Processing timT 300 600
    Hardware Specifications Storage DISKA (MB) 256 512
    Standard I/O 32/32 32/32
    Optional I/O ─ ─
    DA 2 2
    Monitor (Inch) 8 8
    CF Card ─ ─
    CF Card 2 2
    USB ─ ─
    RJ-45 1 1
    VGA Output ─ ─
    PS/2 ─ ─
    RS-232 ─ ─
    RS-422 ─ ─
    RS-485 1 1
    USB ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─
    Pulse Train (CW/CCW) O ─
    Mechatrolink II ─ ─
    Mechatrolink III ─ O
    EtherCAT ─ O
    RTEX ─ O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation ─ ─
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan ─ ─
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters ─ ─
    Quick Parameter Setup ─ ─
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) ─ O
    HSHP Control Mode I (G05.1 Q1) ─ ─
    HSHP Control Mode II (G05P10000) ─ ─
    NURBS Interpolation Ability ─ ─
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit ─ O
    Serial Bus Setting Feature(CNC Axis) ─ O
    Driver Information Display(CNC Axis) ─ O
    Spindle Application Feature(CNC Axis) ─ O
    Serial Bus PLC Axis ─ O
    ROT Element ─ O
    Dipole Front and Back System ─ ─
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) ─ ─
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) ─ O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch ─ O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ ─
    Feature Coordinate Teach ─ ─
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) ─ ─
    Smoothing Path Mode (G05.1) ─ ─
    NURBS Interpolation (G06.2) ─ ─
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) ─ ─
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) ─ O
    Option Option-4 Enable Plugin Function O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ
    Option-17 Commercial Vision Software Δ
    Option-18 CAD/CAM Δ
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control Δ
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6TA-E máy tiện 3-4 trục dạng truyền thông

    Category Items Standard
    6TA 6TB 6TA- E
    Product specification Max. Axes group in system 1 2 1
    Max. PLC axes group — 1 —
    Standard controlled axes
    (standard)    		 3 4 3
    Max. controlled axes (option) 3 4 4
    Max. Number of spindles 2 1
    Max. Axes in synchronous control (single axes group) 3 4 3
    Min. Control unit-mm 0,0001 0,0001
    Max. Number of work
    coordinates system    		 32 100
    Max. Groups of tool compensation 96 32
    Number of multi-channel function groups 4 4
    Number of pre-read segments 64 1000
    Segment process time 300 300
    Hardware specification Storage DISKA (MB) 256 512
    I/O standard 32/32 32/32
    I/O optional None —
    DA 2 2
    Display (Inch) 8 8
    CF card — —
    USB 2 2
    RJ-45 1 1
    VGA output — —
    PS/2 — —
    RS-232 — —
    RS-422 — —
    RS-485 1 1
    USB — —
    SRI — 1
    Servo control General purpose (A/B phase) O —
    General purpose (CW/CCW) O —
    Mechatrolink II — —
    Mechatrolink III — O
    EtherCAT — O
    RTEX — O
    Compensation Back gap compensation O O
    Pitch error compensation O O
    Spike compensation O O
    Temp. Rise compensation O O
    2D compensation O O
    Operation Handwheel simulation O O
    Program empty run O O
    Selective stop O O
    Segment execution O O
    Virtual handwheel O O
    Pause point start O O
    Tool interrupt point start O O
    Tool retract — —
    Offset setting O O
    Handwheel offset function — —
    Program input Selective jump O O
    B-STOP/ program end O O
    Absolute zero coordinates system (G92/G92.1) O O
    Interrupt MACRO (M96/M97) O O
    M 198 call subroutine O O
    G-code extension O O
    High speed high precision Constant Jerk control O O
    Cross-segment S-curve acceleration/ deceleration O O
    Auto deceleration at corner O O
    Corner radius speed limit O O
    Multiple high speed high
    precision parameter set    		 — —
    User quick parameter — —
    SPA function — —
    Virtual circle radius function O O
    High speed high precision control mode I (G05.1Q1) — —
    High speed high precision control mode ii (G05P10000) — —
    NURBS interpolation function — —
    Tool management Auto tool align screen — —
    Auto work measurement O O
    Tool lifespan management O O
    Auxiliary function Mechanical lock (R-Bit) O O
    Software travel limit O O
    Spindle speed detection O O
    Axial coupling function O O
    Axial dynamic coupling function O O
    Feedback coupling function O O
    Threading quick tool retract O O
    Virtual axis function O O
    Axle exchange function O O
    Axial torque control — O
    Serial adjustment function (CNC axis) — O
    Driver data display (CNC axis) — O
    Spindle adaptation function
    (CNC axis)    		 — O
    Serial PLC axis — O
    High speed spindle positioning (SYNTEC spindle required) — O
    ROT element — O
    Dipole foreground/ background
    configuration    		 — —
    Data backup and recover O O
    Start-up screen customization O O
    My favorite (Only support ARM 8-key system) — O
    Project protection function O O
    Access management O O
    Remote AP monitoring O O
    Programming Background edit O O
    Edit protection O O
    Real time syntax check of processing program O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 — O
    Data transfer function NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Data display Operation history display O O
    Graphic simulation O O
    Partial graphic simulation O O
    Dynamic multi-language switch- over — O
    G-code Oval cutting (clockwise) (G02.1) O O
    Parabolic cutting (clockwise) (G02.2) O O
    Cylinder interpolation (G07.1) O O
    Start-up polar coordinates (G12.1) O O
    OD/ID turning cycle (G20) O O
    Threading cycle (G21) O O
    Intermediate threading feed cycle (G21.2) O O
    End face turning cycle (G24) O O
    Jump function (G31) O O
    Treading (G33) O O
    Variable pitch threading (G34) O O
    Polygon turning (G51.2) O O
    Work coordinates system setting (G54~G59.9) O O
    Mirror function (lathe) (G68) O O
    Complex turning cycle (G72~G78) O O
    Fixing cycle for drilling (G80, G83~G89) O O
    Absolute zero coordinates system preset (G92.1) O O
    Inverse time feed (G93) — —
    Constant surface cutting speed (G96) O O
    Spindle synchronization function (G114.1) — —
    Spindle load function (G114.3) — —
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6TA, 6TB máy tiện 3-4 trục dạng xung

    Category Items Standard
    6TA 6TB 6TA- E
    Product specification Max. Axes group in system 1 2 1
    Max. PLC axes group — 1 —
    Standard controlled axes
    (standard)    		 3 4 3
    Max. controlled axes (option) 3 4 4
    Max. Number of spindles 2 1
    Max. Axes in synchronous control (single axes group) 3 4 3
    Min. Control unit-mm 0,0001 0,0001
    Max. Number of work
    coordinates system    		 32 100
    Max. Groups of tool compensation 96 32
    Number of multi-channel function groups 4 4
    Number of pre-read segments 64 1000
    Segment process time 300 300
    Hardware specification Storage DISKA (MB) 256 512
    I/O standard 32/32 32/32
    I/O optional None —
    DA 2 2
    Display (Inch) 8 8
    CF card — —
    USB 2 2
    RJ-45 1 1
    VGA output — —
    PS/2 — —
    RS-232 — —
    RS-422 — —
    RS-485 1 1
    USB — —
    SRI — 1
    Servo control General purpose (A/B phase) O —
    General purpose (CW/CCW) O —
    Mechatrolink II — —
    Mechatrolink III — O
    EtherCAT — O
    RTEX — O
    Compensation Back gap compensation O O
    Pitch error compensation O O
    Spike compensation O O
    Temp. Rise compensation O O
    2D compensation O O
    Operation Handwheel simulation O O
    Program empty run O O
    Selective stop O O
    Segment execution O O
    Virtual handwheel O O
    Pause point start O O
    Tool interrupt point start O O
    Tool retract — —
    Offset setting O O
    Handwheel offset function — —
    Program input Selective jump O O
    B-STOP/ program end O O
    Absolute zero coordinates system (G92/G92.1) O O
    Interrupt MACRO (M96/M97) O O
    M 198 call subroutine O O
    G-code extension O O
    High speed high precision Constant Jerk control O O
    Cross-segment S-curve acceleration/ deceleration O O
    Auto deceleration at corner O O
    Corner radius speed limit O O
    Multiple high speed high
    precision parameter set    		 — —
    User quick parameter — —
    SPA function — —
    Virtual circle radius function O O
    High speed high precision control mode I (G05.1Q1) — —
    High speed high precision control mode ii (G05P10000) — —
    NURBS interpolation function — —
    Tool management Auto tool align screen — —
    Auto work measurement O O
    Tool lifespan management O O
    Auxiliary function Mechanical lock (R-Bit) O O
    Software travel limit O O
    Spindle speed detection O O
    Axial coupling function O O
    Axial dynamic coupling function O O
    Feedback coupling function O O
    Threading quick tool retract O O
    Virtual axis function O O
    Axle exchange function O O
    Axial torque control — O
    Serial adjustment function (CNC axis) — O
    Driver data display (CNC axis) — O
    Spindle adaptation function
    (CNC axis)    		 — O
    Serial PLC axis — O
    High speed spindle positioning (SYNTEC spindle required) — O
    ROT element — O
    Dipole foreground/ background
    configuration    		 — —
    Data backup and recover O O
    Start-up screen customization O O
    My favorite (Only support ARM 8-key system) — O
    Project protection function O O
    Access management O O
    Remote AP monitoring O O
    Programming Background edit O O
    Edit protection O O
    Real time syntax check of processing program O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 — O
    Data transfer function NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Data display Operation history display O O
    Graphic simulation O O
    Partial graphic simulation O O
    Dynamic multi-language switch- over — O
    G-code Oval cutting (clockwise) (G02.1) O O
    Parabolic cutting (clockwise) (G02.2) O O
    Cylinder interpolation (G07.1) O O
    Start-up polar coordinates (G12.1) O O
    OD/ID turning cycle (G20) O O
    Threading cycle (G21) O O
    Intermediate threading feed cycle (G21.2) O O
    End face turning cycle (G24) O O
    Jump function (G31) O O
    Treading (G33) O O
    Variable pitch threading (G34) O O
    Polygon turning (G51.2) O O
    Work coordinates system setting (G54~G59.9) O O
    Mirror function (lathe) (G68) O O
    Complex turning cycle (G72~G78) O O
    Fixing cycle for drilling (G80, G83~G89) O O
    Absolute zero coordinates system preset (G92.1) O O
    Inverse time feed (G93) — —
    Constant surface cutting speed (G96) O O
    Spindle synchronization function (G114.1) — —
    Spindle load function (G114.3) — —
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 7GA máy mài 6 trục dạng truyền thông

    Model Item 7GA
    Axis control Standard. Axis 4
    Max. Axis (Optional) 6
    Max. Spindle 6
    Axis group + PLC axis group 2
    Max. Simultaneous Axis Control Single axis group 4
    Hardware Servo control ECAT/RTEX/M3
    Standard I/O 64/64 (RIO)
    Optional I/O 128/128
    DA –
    Monitor (Inch) 8″
    DiskC 4GB
    DiskA 4GB
    Front interface CF Card –
    USB 2
    Rear interface RJ-45 O
    VGA –
    RS-232 –
    RS-422 –
    RS-485 O
    USB –
    PS/2 –
    KB O
    HK O
    5V O
    SRI O

    O Standard function
    △ Optional function
    – Not available function

  • 7GA máy phay cao tốc 6 trục dạng truyền thông

    Model Item 6GA-E 21GA-E 7GA 22GA
    Axis control Standard. Axis 4 6 4 6
    Max. Axis (Optional) 6 18 6 18
    Max. Spindle 6 6 6 10
    Axis group + PLC axis group 2 4 2 4
    Max. Simultaneous Axis Control Single axis group 4 4 4 4
    Hardware Servo control ECAT/RTEX/M3 ECAT/RTEX/M3 ECAT/RTEX/M3 ECAT/RTEX/M3
    Standard I/O 32/32 32/32 64/64 (RIO) 64/64 (RIO)
    Optional I/O 96/96 96/96 128/128 128/128
    DA 2 2 – –
    Monitor (Inch) 8″ 10.4″ 8″ 10.4″
    DiskC 4GB 4GB 4GB 4GB
    DiskA 4GB 4GB 4GB 4GB
    Front interface CF Card – – – –
    USB 2 2 2 2
    Rear interface RJ-45 O O O O
    VGA – – – –
    RS-232 – – – –
    RS-422 – – – –
    RS-485 O O O O
    USB – – – –
    PS/2 – – – –
    KB O O O O
    HK O O O O
    5V O O O O
    SRI O O O O
    Normal/HPCC 1stCoord: 600/600
    2ndCoord: 600/600
    After opening OP31:
    1stCoord: 1200/1200
    2ndCoord: 1000/1000    		 1stCoord: 4000/4000
    2~4Coord: 1000/1000
    Standard features 1. G5.1
    2. Simultaneous tapping
    3. Fast transmission and fast attack
    4. Tapping and rapid retraction
    5. Multi-spindle simultaneous tapping
    6. Axis exchange function
    7. Overlapping
    9. Single axis group five-axis simultaneous motion function    		 2. Simultaneous tapping
    3. Fast transmission and fast attack
    4. Tapping and rapid retraction
    6. Axis exchange function 7. Overlapping
    10. G120.1 multiple sets of processing conditions    		 2. Simultaneous tapping
    3. Fast transfer and fast attack
    4. Tapping and quick retraction
    6. Axis exchange function
    7. Overlapping
    10. G120.1 multiple sets of processing conditions
    11. G81.1 Chopping
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC) O O
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System Δ
    Option-14 Parameter learning function Δ
    Option-15 Tapping Learning Δ
    Option-16Syntec Vision Δ Δ
    Option-17 Commercial Vision Software Δ Δ
    Option-18 CAD/CAM Δ Δ
    Option-19 3D Arc Interpolation Δ
    Option-20 Pick and Place (All in one) Δ Δ
    Option-21 Four Axis Robot Δ Δ
    Option-22 Five Axis Robot Δ Δ
    Option-23 Six Axis Robot Δ Δ
    Option-24 Gantry Robot Δ Δ
    Option-25 Advanced Look-Ahead Δ
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis Δ
    Option-28 The 2nd coordinate supports feature coordinate system Δ
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control O O
    Option-32 ROT Servo Turret Δ Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    O Standard function
    △ Optional function
    – Not available function

0
    0
    Giỏ Hàng
    Giỏ Hàng RỗngTrở Lại Cửa Hàng
    Tiếp Tục Mua Sắm