Customer Service
Author picture
  • Home  
  • 220MA, 220MB milling machine 8-16 axis serial

220MA, 220MB milling machine 8-16 axis serial

Category Items Composite Milling
210MA-H 210MB-H 210MA-E 210MB-E 220MA 220MB
Product Specification Max. PLC Controlled Paths 4 4
Max. PLC Controlled Paths 3 3
Standard Axis 8 12 8 12 8 12
Max. Axis (Optional) 9 16 9 16 9 16
Max. Spindle 6 6
Max. Simultaneous Axis Control 4 4 4 4
Min. Control (mm) 0,0001 0,0001 0,0001 0,0001
Max. number of program coordinate 100 100
Max. Number of Table Tools 96 96
Multi-Channel Function Group 4 4
Look-Ahead Blocks no. 2000 2000
Block Processing timT 3000 3000
Hardware Specifications Storage DISKA (MB) 4096 4096
Standard I/O 32/32 32/32 32/32 32/32
Optional I/O 96/96 96/96 96/96 128/128
DA 2 2 2 ─
Monitor (Inch) 10,4 8 10,4 10.4/15
CF Card ─ ─ ─ ─
CF Card 2 2
USB ─ 2 2 ─
RJ-45 1 2
VGA Output 1*** ─ ─ ─
PS/2 ─ ─ ─ ─
RS-232 ─ ─ ─ ─
RS-422 ─ ─ ─ ─
RS-485 1 1
USB ─ ─ ─ 2
SRI 1 1
Servo Control Pulse Train (A/B Phase) ─ ─
Pulse Train (CW/CCW) ─ ─
Mechatrolink II O ─
Mechatrolink III O O
EtherCAT O O
RTEX O O
Compensation Backlash Compensation O O
Pitch Error Compensation O O
Angular Error Compensation O O
Temperature Error Compensation O O
2 Dimension Error Compensation O O
Operation MPG Simulation O O
Dry Run O O
Optional Stop O O
Single Block O O
Virtual MPG O O
Restart at Feedhold O O
Restart at Break Point O O
Tool Return O O
Fixture Offsets O O
MPG Offsets O O
Programming Optional Skip O O
B-Stop O O
Absolute Zero Point Coordinate (G92/G92.1) O O
Interrupt Macro (M96/M97) O O
M198 call Subroutines O O
Expandable G Code O O
HSHP Constant Jerk Control O O
Multiblocks S-curve motion plan O O
Auto declaration in Corner O O
Speed Limit for Round Radius O O
Multiple Sets of HSHP Parameters O O
Quick Parameter Setup O O
SPA Feature O O
Virtual Radius Funciton (for Rotary Axis) O O
HSHP Control Mode I (G05.1 Q1) O O
HSHP Control Mode II (G05P10000) O O
NURBS Interpolation Ability O O
Tool
Management		 Auto Tool Setting O O
Auto Tool Management O O
Tool Life Management O O
Accessibility Machine Lock (R bit) O O
Software Limit O O
Spindle Speed Arrival Check O O
Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Rapid Retraction for Rigid Tapping O O
Virtual Axis Feature O O
Axis Change Feature O O
Axial Torque Limit O O
Serial Bus Setting Feature(CNC Axis) O O
Driver Information Display(CNC Axis) O O
Spindle Application Feature(CNC Axis) O O
Serial Bus PLC Axis O O
ROT Element O O
Dipole Front and Back System O O
Data Backup Recovery O O
Customized Opening Screen O O
My Favorites (Only Eight key system supports) O O
Project Protection Feature O O
Limit Access Manager O O
Remote AP Monitor O O
Edit Background Edit O O
Edit Protection O O
Immediate Grammar Check O O
PLC PLC Diagnosis Feature(FORCE I Point) O O
Data Transfer NETWORK O O
FTP O O
RS-485 O O
DNC(Network) O O
DNC(USB) O O
Information Display Operation CV Display O O
Graphic Simulation O O
Partial Graphic Simulation O O
Dynamic Multi-Language Switch O O
Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ
Feature Coordinate Teach Δ Δ
5 axis feature 5 Axis RTCP (G43.4) ─ ─
Smooth TCP ─ ─
G code command High Precision Locus Control Mode (G05P10000) O O
Smoothing Path Mode (G05.1) O O
NURBS Interpolation (G06.2) O O
Thread Cutting (G33) O O
Auto Tool Measurement (G37) O O
Tool of Offsets (G45~G48) O O
High Speed Peck Drilling Cycle (G73) O O
Left Handed Tapping (G74) O O
High Precision Boring Cycle (G76) O O
Drilling cycling (G81) O O
Chopping (G81.1) O O
Bottom Feed Hold Drilling Cycle (G82) O O
Peck Drilling Cycle (G83) O O
Tapping Cycle (G84) O O
Boring Cycle (G85) O O
High Speed Boring Cycle (G86) O O
Back Boring Cycle (G87) O O
Semi Automatic Finishing Boring Cycle (G88) O O
Bottom Feed Hold Boring Cycle (G89) O O
Multi-Group HSHP Parameter (G120.1) O O
Option Option-4 Enable Plugin Function O O
Option-11 High Precision Contour Control (HPCC) O Δ Δ O
Option-12 Rotation Tool Center Point (RTCP) Δ Δ
Option-13 Feature Coordinate System Δ Δ Δ Δ
Option-14 Parameter learning function
Option-15 Tapping Learning
Option-16Syntec Vision Δ Δ Δ Δ
Option-17 Commercial Vision Software Δ Δ Δ Δ
Option-18 CAD/CAM Δ Δ Δ Δ
Option-19 3D Arc Interpolation Δ Δ
Option-20 Pick and Place (All in one) Δ Δ
Option-21 Four Axis Robot
Option-22 Five Axis Robot
Option-23 Six Axis Robot
Option-24 Gantry Robot Δ Δ
Option-25 Advanced Look-Ahead
Option-26 Smooth Tool Center Point(STCP)
Option-27 Multiple mechanisms for five-axis
Option-28 The 2nd coordinate supports feature coordinate system
Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
Option-31 High Speed Chamfering Contour Control
Option-32 ROT Servo Turret
Option-34 Wood Software
Option-35 3D Laser Scanning
Option-36 Wood Built-In CAM Function

* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half

O Standard function
△ Optional function
– Not available function

SKU: 8334 Category: Tags: , , ,

New design of new generation

New design of physical appearanceOpen bus servo communication, support Mechatrolink 3 and EthercatFocus on the pursuit of higher confidence level

Beyond their own, upgrade their controller performance

CPU performance, BPT performance increased by 20%, significantly enhanced short single-section mold and machining capacity of products

High speed spindle orientation function (HPCC)

CPU performance, BPT performance increased by 20%, significantly enhanced short single-section mold and machining capacity of products

SPA2.0(ZPEC) Servo Delay Compensation Level Up

-Enhance the precision of arc and corner

-Improve the path symmetry

-Advance the ability to resist the resonance of machines

Brand

Syntec

Reviews

There are no reviews yet.

Be the first to review “220MA, 220MB milling machine 8-16 axis serial”

Your email address will not be published. Required fields are marked *

Related products

  • 6MA-E, 6MB-E milling machine 3-5 axis serial

    Category Items Standard
    6MA 6MB 6MA-E 6MB-E
    Product Specification Max. PLC Controlled Paths 2 2
    Max. PLC Controlled Paths 1 1
    Standard Axis 3 4 3 4
    Max. Axis (Optional) 3 4 3 5
    Max. Spindle 1 2 3 4
    Max. Simultaneous Axis Control 3 4 4
    Min. Control (mm) 0,0001 0,0001
    Max. number of program coordinate 32 32
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 100 100
    Block Processing timT 300 600
    Hardware Specifications Storage DISKA (MB) 256 512
    Standard I/O 32/32 32/32
    Optional I/O ─ ─
    DA 2 2
    Monitor (Inch) 8 8
    CF Card ─ ─
    CF Card 2 2
    USB ─ ─
    RJ-45 1 1
    VGA Output ─ ─
    PS/2 ─ ─
    RS-232 ─ ─
    RS-422 ─ ─
    RS-485 1 1
    USB ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─
    Pulse Train (CW/CCW) O ─
    Mechatrolink II ─ ─
    Mechatrolink III ─ O
    EtherCAT ─ O
    RTEX ─ O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation ─ ─
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan ─ ─
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters ─ ─
    Quick Parameter Setup ─ ─
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) ─ O
    HSHP Control Mode I (G05.1 Q1) ─ ─
    HSHP Control Mode II (G05P10000) ─ ─
    NURBS Interpolation Ability ─ ─
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit ─ O
    Serial Bus Setting Feature(CNC Axis) ─ O
    Driver Information Display(CNC Axis) ─ O
    Spindle Application Feature(CNC Axis) ─ O
    Serial Bus PLC Axis ─ O
    ROT Element ─ O
    Dipole Front and Back System ─ ─
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) ─ ─
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) ─ O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch ─ O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ ─
    Feature Coordinate Teach ─ ─
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) ─ ─
    Smoothing Path Mode (G05.1) ─ ─
    NURBS Interpolation (G06.2) ─ ─
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) ─ ─
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) ─ O
    Option Option-4 Enable Plugin Function O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ
    Option-17 Commercial Vision Software Δ
    Option-18 CAD/CAM Δ
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control Δ
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • Placeholder

    21MA-E milling machine 6 axis serial

    Category Items Multi-Function Milling
    11MA 11MB 21MA 21MA-E 22MA
    Product Specification Max. PLC Controlled Paths 2 2 2 2
    Max. PLC Controlled Paths 1 1 1 1
    Standard Axis 4 8 6 6 6
    Max. Axis (Optional) 4 8 6 6 6
    Max. Spindle 2 4 4 4 4
    Max. Simultaneous Axis Control 4 4 4 4
    Min. Control (mm) 0,0001 0,0001 0,0001 0,0001
    Max. number of program coordinate 100 100 100 100
    Max. Number of Table Tools 96 96 96 96
    Multi-Channel Function Group 4 4 4 4
    Look-Ahead Blocks no. 1000 2000 2000 2000
    Block Processing timT 2500 2500 2500 2500
    Hardware Specifications Storage DISKA (MB) 512 512 512 4069
    Standard I/O 32/32 64/64 32/32 32/32 32/32
    Optional I/O ─ 128/128 96/96 96/96
    DA 2 2 2
    Monitor (Inch) 10,4 8/10.4/15 8/10.4/15
    CF Card ─ ─ ─
    CF Card 2 2 2
    USB ─ ─ ─
    RJ-45 1 1 1
    VGA Output 1*** ─ ─
    PS/2 ─ ─ ─
    RS-232 ─ ─ ─
    RS-422 ─ ─ ─
    RS-485 1 1 1
    USB ─ ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─ ─
    Pulse Train (CW/CCW) O ─ ─
    Mechatrolink II ─ O ─ ─
    Mechatrolink III ─ ─ O O
    EtherCAT ─ ─ O O
    RTEX ─ ─ O O
    Compensation Backlash Compensation O O O O
    Pitch Error Compensation O O O O
    Angular Error Compensation O O O O
    Temperature Error Compensation O O O O
    2 Dimension Error Compensation O O O O
    Operation MPG Simulation O O O O
    Dry Run O O O O
    Optional Stop O O O O
    Single Block O O O O
    Virtual MPG O O O O
    Restart at Feedhold O O O O
    Restart at Break Point O O O O
    Tool Return O O O O
    Fixture Offsets O O O O
    MPG Offsets O O O O
    Programming Optional Skip O O O O
    B-Stop O O O O
    Absolute Zero Point Coordinate (G92/G92.1) O O O O
    Interrupt Macro (M96/M97) ─ O O O
    M198 call Subroutines ─ O O O
    Expandable G Code O O O O
    HSHP Constant Jerk Control O O O O
    Multiblocks S-curve motion plan O O O O
    Auto declaration in Corner O O O O
    Speed Limit for Round Radius O O O O
    Multiple Sets of HSHP Parameters O O O O
    Quick Parameter Setup O O O O
    SPA Feature O O O O
    Virtual Radius Funciton (for Rotary Axis) ─ O O O
    HSHP Control Mode I (G05.1 Q1) O O O O
    HSHP Control Mode II (G05P10000) O O O O
    NURBS Interpolation Ability O O O O
    Tool
    Management    		 Auto Tool Setting O O O O
    Auto Tool Management O O O O
    Tool Life Management O O O O
    Accessibility Machine Lock (R bit) O O O O
    Software Limit O O O O
    Spindle Speed Arrival Check O O O O
    Axis Synchronize Feature O O O O
    Dynamic Axis Synchronize Feature O O O O
    Dynamic Axis Synchronize Feature O O O O
    Rapid Retraction for Rigid Tapping O O O O
    Virtual Axis Feature O O O O
    Axis Change Feature O O O O
    Axial Torque Limit ─ O O O
    Serial Bus Setting Feature(CNC Axis) ─ O O O
    Driver Information Display(CNC Axis) ─ O O O
    Spindle Application Feature(CNC Axis) ─ O O O
    Serial Bus PLC Axis ─ O O O
    ROT Element ─ O O O
    Dipole Front and Back System O O O O
    Data Backup Recovery O O O O
    Customized Opening Screen O O O O
    My Favorites (Only Eight key system supports) O O O O
    Project Protection Feature O O O O
    Limit Access Manager O O O O
    Remote AP Monitor O O O O
    Edit Background Edit O O O O
    Edit Protection O O O O
    Immediate Grammar Check O O O O
    PLC PLC Diagnosis Feature(FORCE I Point) O O O O
    Data Transfer NETWORK O O O O
    FTP O O O O
    RS-485 O O O O
    DNC(Network) O O O O
    DNC(USB) O O O O
    Information Display Operation CV Display O O O O
    Graphic Simulation O O O O
    Partial Graphic Simulation ─ O O O
    Dynamic Multi-Language Switch O O O O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ Δ Δ Δ
    Feature Coordinate Teach ─ Δ Δ Δ
    5 axis feature 5 Axis RTCP (G43.4) ─ ─ ─ ─
    Smooth TCP ─ ─ ─ ─
    G code command High Precision Locus Control Mode (G05P10000) O O O O
    Smoothing Path Mode (G05.1) O O O O
    NURBS Interpolation (G06.2) O O O
    Thread Cutting (G33) O O O O
    Auto Tool Measurement (G37) O O O O
    Tool of Offsets (G45~G48) O O O O
    High Speed Peck Drilling Cycle (G73) O O O O
    Left Handed Tapping (G74) O O O O
    High Precision Boring Cycle (G76) O O O O
    Drilling cycling (G81) O O O O
    Chopping (G81.1) O O O O
    Bottom Feed Hold Drilling Cycle (G82) O O O O
    Peck Drilling Cycle (G83) O O O O
    Tapping Cycle (G84) O O O O
    Boring Cycle (G85) O O O O
    High Speed Boring Cycle (G86) O O O O
    Back Boring Cycle (G87) O O O O
    Semi Automatic Finishing Boring Cycle (G88) O O O O
    Bottom Feed Hold Boring Cycle (G89) O O O O
    Multi-Group HSHP Parameter (G120.1) O O O O
    Option Option-4 Enable Plugin Function O O O
    Option-11 High Precision Contour Control (HPCC) O O O
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System Δ Δ Δ
    Option-14 Parameter learning function Δ
    Option-15 Tapping Learning Δ
    Option-16Syntec Vision Δ Δ Δ
    Option-17 Commercial Vision Software Δ Δ Δ
    Option-18 CAD/CAM Δ Δ Δ
    Option-19 3D Arc Interpolation Δ Δ
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead Δ
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis Δ
    Option-28 The 2nd coordinate supports feature coordinate system Δ
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 200MA-5, 200MB-5 milling machine 8-16 axis serial

    Category Items Five -Axis
    200MA-5 200MB-5 210MA-H5 210MB-H5 220MA-5 220MB-5
    Product Specification Max. PLC Controlled Paths 4 4 4
    Max. PLC Controlled Paths 3 3 3
    Standard Axis 8 12 8 12 8 12
    Max. Axis (Optional) 9 16 9 16 9 16
    Max. Spindle 6 6 6
    Max. Simultaneous Axis Control 5 5 5 5
    Min. Control (mm) 0,0001 0,0001 0,0001
    Max. number of program coordinate 100 100 100
    Max. Number of Table Tools 96 96 96
    Multi-Channel Function Group 4 4 4
    Look-Ahead Blocks no. 2000 2000 2000
    Block Processing timT 4000 4000 4000
    Hardware Specifications Storage DISKA (MB) 256 4096 4096
    Standard I/O 32/32 32/32 32/32
    Optional I/O 96/96 96/96 128/128
    DA 1 2 ─
    Monitor (Inch) 10.4/15 10,4 10.4/15
    CF Card 1 ─ ─
    CF Card 2 2 2
    USB 2 ─ ─
    RJ-45 2 1 2
    VGA Output 1 1*** ─
    PS/2 1 ─ ─
    RS-232 1 ─ ─
    RS-422 1 ─ ─
    RS-485 1 1 1
    USB 2 ─ 2
    SRI ─ 1 1
    Servo Control Pulse Train (A/B Phase) ─ ─ ─
    Pulse Train (CW/CCW) ─ ─ ─
    Mechatrolink II O O ─
    Mechatrolink III ─ O O
    EtherCAT ─ O O
    RTEX ─ O O
    Compensation Backlash Compensation O O O
    Pitch Error Compensation O O O
    Angular Error Compensation O O O
    Temperature Error Compensation O O O
    2 Dimension Error Compensation O O O
    Operation MPG Simulation O O O
    Dry Run O O O
    Optional Stop O O O
    Single Block O O O
    Virtual MPG O O O
    Restart at Feedhold O O O
    Restart at Break Point O O O
    Tool Return O O O
    Fixture Offsets O O O
    MPG Offsets O O O
    Programming Optional Skip O O O
    B-Stop O O O
    Absolute Zero Point Coordinate (G92/G92.1) O O O
    Interrupt Macro (M96/M97) O O O
    M198 call Subroutines O O O
    Expandable G Code O O O
    HSHP Constant Jerk Control O O O
    Multiblocks S-curve motion plan O O O
    Auto declaration in Corner O O O
    Speed Limit for Round Radius O O O
    Multiple Sets of HSHP Parameters O O O
    Quick Parameter Setup O O O
    SPA Feature O O O
    Virtual Radius Funciton (for Rotary Axis) O O O
    HSHP Control Mode I (G05.1 Q1) O O O
    HSHP Control Mode II (G05P10000) Δ O O
    NURBS Interpolation Ability Δ O O
    Tool
    Management    		 Auto Tool Setting O O O
    Auto Tool Management O O O
    Tool Life Management O O O
    Accessibility Machine Lock (R bit) O O O
    Software Limit O O O
    Spindle Speed Arrival Check O O O
    Axis Synchronize Feature O O O
    Dynamic Axis Synchronize Feature O O O
    Dynamic Axis Synchronize Feature O O O
    Rapid Retraction for Rigid Tapping O O O
    Virtual Axis Feature O O O
    Axis Change Feature O O O
    Axial Torque Limit O O O
    Serial Bus Setting Feature(CNC Axis) O O O
    Driver Information Display(CNC Axis) O O O
    Spindle Application Feature(CNC Axis) O O O
    Serial Bus PLC Axis O O O
    ROT Element O O O
    Dipole Front and Back System O O O
    Data Backup Recovery O O O
    Customized Opening Screen O O O
    My Favorites (Only Eight key system supports) O
    ─    		 O O
    Project Protection Feature O O O
    Limit Access Manager O O O
    Remote AP Monitor O O O
    Edit Background Edit O O O
    Edit Protection O O O
    Immediate Grammar Check O O O
    PLC PLC Diagnosis Feature(FORCE I Point) O O O
    Data Transfer NETWORK O O O
    FTP O O O
    RS-485 O O O
    DNC(Network) O O O
    DNC(USB) O O O
    Information Display Operation CV Display O O O
    Graphic Simulation O O O
    Partial Graphic Simulation O O O
    Dynamic Multi-Language Switch O O O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ Δ
    Feature Coordinate Teach Δ Δ Δ
    5 axis feature 5 Axis RTCP (G43.4) Δ Δ Δ
    Smooth TCP Δ Δ Δ
    G code command High Precision Locus Control Mode (G05P10000) Δ O O
    Smoothing Path Mode (G05.1) O O O
    NURBS Interpolation (G06.2) Δ O O
    Thread Cutting (G33) O O O
    Auto Tool Measurement (G37) O O O
    Tool of Offsets (G45~G48) O O O
    High Speed Peck Drilling Cycle (G73) O O O
    Left Handed Tapping (G74) O O O
    High Precision Boring Cycle (G76) O O O
    Drilling cycling (G81) O O O
    Chopping (G81.1) O O O
    Bottom Feed Hold Drilling Cycle (G82) O O O
    Peck Drilling Cycle (G83) O O O
    Tapping Cycle (G84) O O O
    Boring Cycle (G85) O O O
    High Speed Boring Cycle (G86) O O O
    Back Boring Cycle (G87) O O O
    Semi Automatic Finishing Boring Cycle (G88) O O O
    Bottom Feed Hold Boring Cycle (G89) O O O
    Multi-Group HSHP Parameter (G120.1) O O O
    Option Option-4 Enable Plugin Function O O O
    Option-11 High Precision Contour Control (HPCC) Δ O O
    Option-12 Rotation Tool Center Point (RTCP) Δ Δ Δ
    Option-13 Feature Coordinate System Δ Δ Δ
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ Δ Δ
    Option-17 Commercial Vision Software Δ Δ Δ
    Option-18 CAD/CAM Δ Δ Δ
    Option-19 3D Arc Interpolation Δ Δ Δ
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6MA, 6MB milling machine 3-4 axis pulse

    Category Items Standard
    6MA 6MB 6MA-E 6MB-E
    Product Specification Max. PLC Controlled Paths 2 2
    Max. PLC Controlled Paths 1 1
    Standard Axis 3 4 3 4
    Max. Axis (Optional) 3 4 3 5
    Max. Spindle 1 2 3 4
    Max. Simultaneous Axis Control 3 4 4
    Min. Control (mm) 0,0001 0,0001
    Max. number of program coordinate 32 32
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 100 100
    Block Processing timT 300 600
    Hardware Specifications Storage DISKA (MB) 256 512
    Standard I/O 32/32 32/32
    Optional I/O ─ ─
    DA 2 2
    Monitor (Inch) 8 8
    CF Card ─ ─
    CF Card 2 2
    USB ─ ─
    RJ-45 1 1
    VGA Output ─ ─
    PS/2 ─ ─
    RS-232 ─ ─
    RS-422 ─ ─
    RS-485 1 1
    USB ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─
    Pulse Train (CW/CCW) O ─
    Mechatrolink II ─ ─
    Mechatrolink III ─ O
    EtherCAT ─ O
    RTEX ─ O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation ─ ─
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan ─ ─
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters ─ ─
    Quick Parameter Setup ─ ─
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) ─ O
    HSHP Control Mode I (G05.1 Q1) ─ ─
    HSHP Control Mode II (G05P10000) ─ ─
    NURBS Interpolation Ability ─ ─
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit ─ O
    Serial Bus Setting Feature(CNC Axis) ─ O
    Driver Information Display(CNC Axis) ─ O
    Spindle Application Feature(CNC Axis) ─ O
    Serial Bus PLC Axis ─ O
    ROT Element ─ O
    Dipole Front and Back System ─ ─
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) ─ ─
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) ─ O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch ─ O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ ─
    Feature Coordinate Teach ─ ─
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) ─ ─
    Smoothing Path Mode (G05.1) ─ ─
    NURBS Interpolation (G06.2) ─ ─
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) ─ ─
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) ─ O
    Option Option-4 Enable Plugin Function O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ
    Option-17 Commercial Vision Software Δ
    Option-18 CAD/CAM Δ
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control Δ
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Continue Shopping