Hỗ Trợ
Author picture

11TB máy tiện 8 trục dạng xung

Category Items Multi Axis Group Mill Turn
11TB 200TB-5 210TB-H 210TB-H5 220TB 220TB-5
Product specification Max. Axes group in system 2 4 4 4
Max. PLC axes group 1 3 3 3
Standard controlled axes
(standard)		 8 12 12 12 12 12
Max. controlled axes (option) 8 16 16 16 16 16
Max. Number of spindles 6 6 6 6
Max. Axes in synchronous control (single axes group) 4 5 4 5 4 5
Min. Control unit-mm 0,0001 0,0001 0,0001 0,0001
Max. Number of work
coordinates system		 100 100 100 100
Max. Groups of tool compensation 96 96 96 96
Number of multi-channel function groups 4 4 4 4
Number of pre-read segments 1000 2000 2000 2000
Segment process time 1000 4000 1000 4000 1000 4000
Hardware specification Storage DISKA (MB) 512 256 4096 4096
I/O standard 64/64 32/32 32/32 32/32
I/O optional 128/128 96/96 96/96 128/128
DA 2 2 2 2
Display (Inch) 10,4 8/10.4 8/10.4/rear half*** 10.4/15
CF card — — — —
USB 2 1 2 2
RJ-45 1 2 1 2
VGA output — 1 1*** —
PS/2 — 1 — —
RS-232 — 1 — —
RS-422 — 1 — —
RS-485 1 — 1 1
USB — 2 — 2
SRI — — 1 1
Servo control General purpose (A/B phase) O — — —
General purpose (CW/CCW) O — — —
Mechatrolink II — O O O
Mechatrolink III — — O O
EtherCAT — — O O
RTEX — — O O
Compensation Back gap compensation O O O O
Pitch error compensation O O O O
Spike compensation O O O O
Temp. Rise compensation O O O O
2D compensation O O O O
Operation Handwheel simulation O O O O
Program empty run O O O O
Selective stop O O O O
Segment execution O O O O
Virtual handwheel O O O O
Pause point start O O O O
Tool interrupt point start O O O O
Tool retract — — — —
Offset setting O O O O
Handwheel offset function — — — —
Program input Selective jump O O O O
B-STOP/ program end O O O O
Absolute zero coordinates system (G92/G92.1) O O O O
Interrupt MACRO (M96/M97) O O O O
M 198 call subroutine O O O O
G-code extension O O O O
High speed high precision Constant Jerk control O O O O
Cross-segment S-curve acceleration/ deceleration O O O O
Auto deceleration at corner O O O O
Corner radius speed limit O O O O
Multiple high speed high
precision parameter set		 — — — —
User quick parameter — — — —
SPA function — — — —
Virtual circle radius function O O O O
High speed high precision control mode I (G05.1Q1) — — — —
High speed high precision control mode ii (G05P10000) — — — —
NURBS interpolation function — — — —
Tool management Auto tool align screen — — — —
Auto work measurement O O O O
Tool lifespan management O O O O
Auxiliary function Mechanical lock (R-Bit) O O O O
Software travel limit O O O O
Spindle speed detection O O O O
Axial coupling function O O O O
Axial dynamic coupling function O O O O
Feedback coupling function O O O O
Threading quick tool retract O O O O
Virtual axis function O O O O
Axle exchange function O O O O
Axial torque control — O O O
Serial adjustment function (CNC axis) — O O O
Driver data display (CNC axis) — O O O
Spindle adaptation function
(CNC axis)		 — O O O
Serial PLC axis — O O O
High speed spindle positioning (SYNTEC spindle required) — O O O
ROT element — O O O
Dipole foreground/ background
configuration		 O O O O
Data backup and recover O O O O
Start-up screen customization O O O O
My favorite (Only support ARM 8-key system) O — O O
Project protection function O O O O
Access management O O O O
Remote AP monitoring O O O O
Programming Background edit O O O O
Edit protection O O O O
Real time syntax check of processing program O O O O
PLC PLC diagnosis function (FORCE I-
point)		 O O O O
Data transfer function NETWORK O O O O
FTP O O O O
RS-485 O O O O
DNC(Network) O O O O
DNC(USB) O O O O
Data display Operation history display O O O O
Graphic simulation O O O O
Partial graphic simulation O O O O
Dynamic multi-language switch- over O O O O
G-code Oval cutting (clockwise) (G02.1) O O O O
Parabolic cutting (clockwise) (G02.2) O O O O
Cylinder interpolation (G07.1) O O O O
Start-up polar coordinates (G12.1) O O O O
OD/ID turning cycle (G20) O O O O
Threading cycle (G21) O O O O
Intermediate threading feed cycle (G21.2) O O O O
End face turning cycle (G24) O O O O
Jump function (G31) O O O O
Treading (G33) O O O O
Variable pitch threading (G34) O O O O
Polygon turning (G51.2) O O O O
Work coordinates system setting (G54~G59.9) O O O O
Mirror function (lathe) (G68) O O O O
Complex turning cycle (G72~G78) O O O O
Fixing cycle for drilling (G80, G83~G89) O O O O
Absolute zero coordinates system preset (G92.1) O O O O
Inverse time feed (G93) — — — —
Constant surface cutting speed (G96) O O O O
Spindle synchronization function (G114.1) O O O O
Spindle load function (G114.3) O O O O
Option Option-4 Enable Plugin Function O O O O
Option-11 High Precision Contour Control (HPCC)
Option-12 Rotation Tool Center Point (RTCP) Δ Δ Δ
Option-13 Feature Coordinate System Δ Δ Δ
Option-14 Parameter learning function
Option-15 Tapping Learning
Option-16Syntec Vision
Option-17 Commercial Vision Software
Option-18 CAD/CAM
Option-19 3D Arc Interpolation
Option-20 Pick and Place (All in one) Δ Δ Δ
Option-21 Four Axis Robot
Option-22 Five Axis Robot
Option-23 Six Axis Robot
Option-24 Gantry Robot Δ
Option-25 Advanced Look-Ahead
Option-26 Smooth Tool Center Point(STCP)
Option-27 Multiple mechanisms for five-axis
Option-28 The 2nd coordinate supports feature coordinate system
Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
Option-31 High Speed Chamfering Contour Control
Option-32 ROT Servo Turret Δ Δ Δ
Option-34 Wood Software
Option-35 3D Laser Scanning
Option-36 Wood Built-In CAM Function

* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half

O Standard function
△ Optional function
– Not available function

Mã: 8175 Danh mục: Thẻ: , , ,

Bộ điều khiển máy tiện 

Giao diện mới, thao tác dễ dàng và nhanh hơn.

Hỗ trợ giao tiếp dạng xung

Tiết kiệm chi phí driver servo. Có khả năng giữ lại các dòng driver dạng xung khi nâng cấp máy.

Brand

Syntec

Đánh giá

Không có bình luận nào

Hãy là người đầu tiên đánh giá “11TB máy tiện 8 trục dạng xung”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Sản phẩm liên quan

  • 6TA-E máy tiện 3-4 trục dạng truyền thông

    Category Items Standard
    6TA 6TB 6TA- E
    Product specification Max. Axes group in system 1 2 1
    Max. PLC axes group — 1 —
    Standard controlled axes
    (standard)    		 3 4 3
    Max. controlled axes (option) 3 4 4
    Max. Number of spindles 2 1
    Max. Axes in synchronous control (single axes group) 3 4 3
    Min. Control unit-mm 0,0001 0,0001
    Max. Number of work
    coordinates system    		 32 100
    Max. Groups of tool compensation 96 32
    Number of multi-channel function groups 4 4
    Number of pre-read segments 64 1000
    Segment process time 300 300
    Hardware specification Storage DISKA (MB) 256 512
    I/O standard 32/32 32/32
    I/O optional None —
    DA 2 2
    Display (Inch) 8 8
    CF card — —
    USB 2 2
    RJ-45 1 1
    VGA output — —
    PS/2 — —
    RS-232 — —
    RS-422 — —
    RS-485 1 1
    USB — —
    SRI — 1
    Servo control General purpose (A/B phase) O —
    General purpose (CW/CCW) O —
    Mechatrolink II — —
    Mechatrolink III — O
    EtherCAT — O
    RTEX — O
    Compensation Back gap compensation O O
    Pitch error compensation O O
    Spike compensation O O
    Temp. Rise compensation O O
    2D compensation O O
    Operation Handwheel simulation O O
    Program empty run O O
    Selective stop O O
    Segment execution O O
    Virtual handwheel O O
    Pause point start O O
    Tool interrupt point start O O
    Tool retract — —
    Offset setting O O
    Handwheel offset function — —
    Program input Selective jump O O
    B-STOP/ program end O O
    Absolute zero coordinates system (G92/G92.1) O O
    Interrupt MACRO (M96/M97) O O
    M 198 call subroutine O O
    G-code extension O O
    High speed high precision Constant Jerk control O O
    Cross-segment S-curve acceleration/ deceleration O O
    Auto deceleration at corner O O
    Corner radius speed limit O O
    Multiple high speed high
    precision parameter set    		 — —
    User quick parameter — —
    SPA function — —
    Virtual circle radius function O O
    High speed high precision control mode I (G05.1Q1) — —
    High speed high precision control mode ii (G05P10000) — —
    NURBS interpolation function — —
    Tool management Auto tool align screen — —
    Auto work measurement O O
    Tool lifespan management O O
    Auxiliary function Mechanical lock (R-Bit) O O
    Software travel limit O O
    Spindle speed detection O O
    Axial coupling function O O
    Axial dynamic coupling function O O
    Feedback coupling function O O
    Threading quick tool retract O O
    Virtual axis function O O
    Axle exchange function O O
    Axial torque control — O
    Serial adjustment function (CNC axis) — O
    Driver data display (CNC axis) — O
    Spindle adaptation function
    (CNC axis)    		 — O
    Serial PLC axis — O
    High speed spindle positioning (SYNTEC spindle required) — O
    ROT element — O
    Dipole foreground/ background
    configuration    		 — —
    Data backup and recover O O
    Start-up screen customization O O
    My favorite (Only support ARM 8-key system) — O
    Project protection function O O
    Access management O O
    Remote AP monitoring O O
    Programming Background edit O O
    Edit protection O O
    Real time syntax check of processing program O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 — O
    Data transfer function NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Data display Operation history display O O
    Graphic simulation O O
    Partial graphic simulation O O
    Dynamic multi-language switch- over — O
    G-code Oval cutting (clockwise) (G02.1) O O
    Parabolic cutting (clockwise) (G02.2) O O
    Cylinder interpolation (G07.1) O O
    Start-up polar coordinates (G12.1) O O
    OD/ID turning cycle (G20) O O
    Threading cycle (G21) O O
    Intermediate threading feed cycle (G21.2) O O
    End face turning cycle (G24) O O
    Jump function (G31) O O
    Treading (G33) O O
    Variable pitch threading (G34) O O
    Polygon turning (G51.2) O O
    Work coordinates system setting (G54~G59.9) O O
    Mirror function (lathe) (G68) O O
    Complex turning cycle (G72~G78) O O
    Fixing cycle for drilling (G80, G83~G89) O O
    Absolute zero coordinates system preset (G92.1) O O
    Inverse time feed (G93) — —
    Constant surface cutting speed (G96) O O
    Spindle synchronization function (G114.1) — —
    Spindle load function (G114.3) — —
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 210TB-H, 210TB-H5 máy tiện 12-16 trục dạng truyền thông

    Category Items Multi Axis Group Mill Turn
    11TB 200TB-5 210TB-H 210TB-H5 220TB 220TB-5
    Product specification Max. Axes group in system 2 4 4 4
    Max. PLC axes group 1 3 3 3
    Standard controlled axes
    (standard)    		 8 12 12 12 12 12
    Max. controlled axes (option) 8 16 16 16 16 16
    Max. Number of spindles 6 6 6 6
    Max. Axes in synchronous control (single axes group) 4 5 4 5 4 5
    Min. Control unit-mm 0,0001 0,0001 0,0001 0,0001
    Max. Number of work
    coordinates system    		 100 100 100 100
    Max. Groups of tool compensation 96 96 96 96
    Number of multi-channel function groups 4 4 4 4
    Number of pre-read segments 1000 2000 2000 2000
    Segment process time 1000 4000 1000 4000 1000 4000
    Hardware specification Storage DISKA (MB) 512 256 4096 4096
    I/O standard 64/64 32/32 32/32 32/32
    I/O optional 128/128 96/96 96/96 128/128
    DA 2 2 2 2
    Display (Inch) 10,4 8/10.4 8/10.4/rear half*** 10.4/15
    CF card — — — —
    USB 2 1 2 2
    RJ-45 1 2 1 2
    VGA output — 1 1*** —
    PS/2 — 1 — —
    RS-232 — 1 — —
    RS-422 — 1 — —
    RS-485 1 — 1 1
    USB — 2 — 2
    SRI — — 1 1
    Servo control General purpose (A/B phase) O — — —
    General purpose (CW/CCW) O — — —
    Mechatrolink II — O O O
    Mechatrolink III — — O O
    EtherCAT — — O O
    RTEX — — O O
    Compensation Back gap compensation O O O O
    Pitch error compensation O O O O
    Spike compensation O O O O
    Temp. Rise compensation O O O O
    2D compensation O O O O
    Operation Handwheel simulation O O O O
    Program empty run O O O O
    Selective stop O O O O
    Segment execution O O O O
    Virtual handwheel O O O O
    Pause point start O O O O
    Tool interrupt point start O O O O
    Tool retract — — — —
    Offset setting O O O O
    Handwheel offset function — — — —
    Program input Selective jump O O O O
    B-STOP/ program end O O O O
    Absolute zero coordinates system (G92/G92.1) O O O O
    Interrupt MACRO (M96/M97) O O O O
    M 198 call subroutine O O O O
    G-code extension O O O O
    High speed high precision Constant Jerk control O O O O
    Cross-segment S-curve acceleration/ deceleration O O O O
    Auto deceleration at corner O O O O
    Corner radius speed limit O O O O
    Multiple high speed high
    precision parameter set    		 — — — —
    User quick parameter — — — —
    SPA function — — — —
    Virtual circle radius function O O O O
    High speed high precision control mode I (G05.1Q1) — — — —
    High speed high precision control mode ii (G05P10000) — — — —
    NURBS interpolation function — — — —
    Tool management Auto tool align screen — — — —
    Auto work measurement O O O O
    Tool lifespan management O O O O
    Auxiliary function Mechanical lock (R-Bit) O O O O
    Software travel limit O O O O
    Spindle speed detection O O O O
    Axial coupling function O O O O
    Axial dynamic coupling function O O O O
    Feedback coupling function O O O O
    Threading quick tool retract O O O O
    Virtual axis function O O O O
    Axle exchange function O O O O
    Axial torque control — O O O
    Serial adjustment function (CNC axis) — O O O
    Driver data display (CNC axis) — O O O
    Spindle adaptation function
    (CNC axis)    		 — O O O
    Serial PLC axis — O O O
    High speed spindle positioning (SYNTEC spindle required) — O O O
    ROT element — O O O
    Dipole foreground/ background
    configuration    		 O O O O
    Data backup and recover O O O O
    Start-up screen customization O O O O
    My favorite (Only support ARM 8-key system) O — O O
    Project protection function O O O O
    Access management O O O O
    Remote AP monitoring O O O O
    Programming Background edit O O O O
    Edit protection O O O O
    Real time syntax check of processing program O O O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 O O O O
    Data transfer function NETWORK O O O O
    FTP O O O O
    RS-485 O O O O
    DNC(Network) O O O O
    DNC(USB) O O O O
    Data display Operation history display O O O O
    Graphic simulation O O O O
    Partial graphic simulation O O O O
    Dynamic multi-language switch- over O O O O
    G-code Oval cutting (clockwise) (G02.1) O O O O
    Parabolic cutting (clockwise) (G02.2) O O O O
    Cylinder interpolation (G07.1) O O O O
    Start-up polar coordinates (G12.1) O O O O
    OD/ID turning cycle (G20) O O O O
    Threading cycle (G21) O O O O
    Intermediate threading feed cycle (G21.2) O O O O
    End face turning cycle (G24) O O O O
    Jump function (G31) O O O O
    Treading (G33) O O O O
    Variable pitch threading (G34) O O O O
    Polygon turning (G51.2) O O O O
    Work coordinates system setting (G54~G59.9) O O O O
    Mirror function (lathe) (G68) O O O O
    Complex turning cycle (G72~G78) O O O O
    Fixing cycle for drilling (G80, G83~G89) O O O O
    Absolute zero coordinates system preset (G92.1) O O O O
    Inverse time feed (G93) — — — —
    Constant surface cutting speed (G96) O O O O
    Spindle synchronization function (G114.1) O O O O
    Spindle load function (G114.3) O O O O
    Option Option-4 Enable Plugin Function O O O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP) Δ Δ Δ
    Option-13 Feature Coordinate System Δ Δ Δ
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ Δ Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 11TA máy tiện 4 trục dạng xung

    Category Items General Mill Turn
    11TA** 21TA 21TB 21TA-E 21TB-E 22TA 22TB
    Product specification Max. Axes group in system 2 2 2 2
    Max. PLC axes group 1 1 1 1
    Standard controlled axes
    (standard)    		 4 4 6 4 6 4 6
    Max. controlled axes (option) 4 4 8 4 8 4 8
    Max. Number of spindles 2 2 4 2 4 2 4
    Max. Axes in synchronous control (single axes group) 4 4 4 4 4 4 4
    Min. Control unit-mm 0,0001 0,0001 0,0001 0,0001
    Max. Number of work
    coordinates system    		 100 100 100 100
    Max. Groups of tool compensation 96 96 96 96
    Number of multi-channel function groups 4 4 4 4
    Number of pre-read segments 1000 1000 1000 1000
    Segment process time 1000 1000 1000 1000
    Hardware specification Storage DISKA (MB) 512 512 512 4096
    I/O standard 32/32 32/32 32/32 32/32
    I/O optional None 96/96 96/96 128/128
    DA 2 2 2 —
    Display (Inch) 10,4 8/10.4 8/10.4 8/10.4/15
    CF card — — — —
    USB 2 2 2 2
    RJ-45 1 1 1 2
    VGA output — — — —
    PS/2 — — — —
    RS-232 — — — —
    RS-422 — — — —
    RS-485 1 1 1 1
    USB — — — 2
    SRI — — 1 1
    Servo control General purpose (A/B phase) O — — —
    General purpose (CW/CCW) O — — —
    Mechatrolink II — O — —
    Mechatrolink III — — O O
    EtherCAT — — O O
    RTEX — — O O
    Compensation Back gap compensation O O O O
    Pitch error compensation O O O O
    Spike compensation O O O O
    Temp. Rise compensation O O O O
    2D compensation O O O O
    Operation Handwheel simulation O O O O
    Program empty run O O O O
    Selective stop O O O O
    Segment execution O O O O
    Virtual handwheel O O O O
    Pause point start O O O O
    Tool interrupt point start O O O O
    Tool retract — — — —
    Offset setting O O O O
    Handwheel offset function — — — —
    Program input Selective jump O O O O
    B-STOP/ program end O O O O
    Absolute zero coordinates system (G92/G92.1) O O O O
    Interrupt MACRO (M96/M97) O O O O
    M 198 call subroutine O O O O
    G-code extension O O O O
    High speed high precision Constant Jerk control O O O O
    Cross-segment S-curve acceleration/ deceleration O O O O
    Auto deceleration at corner O O O O
    Corner radius speed limit O O O O
    Multiple high speed high
    precision parameter set    		 — — — —
    User quick parameter — — — —
    SPA function — — — —
    Virtual circle radius function O O O O
    High speed high precision control mode I (G05.1Q1) — — — —
    High speed high precision control mode ii (G05P10000) — — — —
    NURBS interpolation function — — — —
    Tool management Auto tool align screen — — — —
    Auto work measurement O O O O
    Tool lifespan management O O O O
    Auxiliary function Mechanical lock (R-Bit) O O O O
    Software travel limit O O O O
    Spindle speed detection O O O O
    Axial coupling function O O O O
    Axial dynamic coupling function O O O O
    Feedback coupling function O O O O
    Threading quick tool retract O O O O
    Virtual axis function O O O O
    Axle exchange function O O O O
    Axial torque control — O O O
    Serial adjustment function (CNC axis) — O O O
    Driver data display (CNC axis) — O O O
    Spindle adaptation function
    (CNC axis)    		 — O O O
    Serial PLC axis — O O O
    High speed spindle positioning (SYNTEC spindle required) — O O O
    ROT element — O O O
    Dipole foreground/ background
    configuration    		 O O O O
    Data backup and recover O O O O
    Start-up screen customization O O O O
    My favorite (Only support ARM 8-key system) O O O O
    Project protection function O O O O
    Access management O O O O
    Remote AP monitoring O O O O
    Programming Background edit O O O O
    Edit protection O O O O
    Real time syntax check of processing program O O O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 O O O O
    Data transfer function NETWORK O O O O
    FTP O O O O
    RS-485 O O O O
    DNC(Network) O O O O
    DNC(USB) O O O O
    Data display Operation history display O O O O
    Graphic simulation O O O O
    Partial graphic simulation O O O O
    Dynamic multi-language switch- over O O O O
    G-code Oval cutting (clockwise) (G02.1) O O O O
    Parabolic cutting (clockwise) (G02.2) O O O O
    Cylinder interpolation (G07.1) O O O O
    Start-up polar coordinates (G12.1) O O O O
    OD/ID turning cycle (G20) O O O O
    Threading cycle (G21) O O O O
    Intermediate threading feed cycle (G21.2) O O O O
    End face turning cycle (G24) O O O O
    Jump function (G31) O O O O
    Treading (G33) O O O O
    Variable pitch threading (G34) O O O O
    Polygon turning (G51.2) O O O O
    Work coordinates system setting (G54~G59.9) O O O O
    Mirror function (lathe) (G68) O O O O
    Complex turning cycle (G72~G78) O O O O
    Fixing cycle for drilling (G80, G83~G89) O O O O
    Absolute zero coordinates system preset (G92.1) O O O O
    Inverse time feed (G93) — — — —
    Constant surface cutting speed (G96) O O O O
    Spindle synchronization function (G114.1) — O O O
    Spindle load function (G114.3) — O O O
    Option Option-4 Enable Plugin Function O O O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ Δ Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 21TA-E, 21TB-E máy tiện 4-8 trục dạng truyền thông

    Category Items General Mill Turn
    11TA** 21TA 21TB 21TA-E 21TB-E 22TA 22TB
    Product specification Max. Axes group in system 2 2 2 2
    Max. PLC axes group 1 1 1 1
    Standard controlled axes
    (standard)    		 4 4 6 4 6 4 6
    Max. controlled axes (option) 4 4 8 4 8 4 8
    Max. Number of spindles 2 2 4 2 4 2 4
    Max. Axes in synchronous control (single axes group) 4 4 4 4 4 4 4
    Min. Control unit-mm 0,0001 0,0001 0,0001 0,0001
    Max. Number of work
    coordinates system    		 100 100 100 100
    Max. Groups of tool compensation 96 96 96 96
    Number of multi-channel function groups 4 4 4 4
    Number of pre-read segments 1000 1000 1000 1000
    Segment process time 1000 1000 1000 1000
    Hardware specification Storage DISKA (MB) 512 512 512 4096
    I/O standard 32/32 32/32 32/32 32/32
    I/O optional None 96/96 96/96 128/128
    DA 2 2 2 —
    Display (Inch) 10,4 8/10.4 8/10.4 8/10.4/15
    CF card — — — —
    USB 2 2 2 2
    RJ-45 1 1 1 2
    VGA output — — — —
    PS/2 — — — —
    RS-232 — — — —
    RS-422 — — — —
    RS-485 1 1 1 1
    USB — — — 2
    SRI — — 1 1
    Servo control General purpose (A/B phase) O — — —
    General purpose (CW/CCW) O — — —
    Mechatrolink II — O — —
    Mechatrolink III — — O O
    EtherCAT — — O O
    RTEX — — O O
    Compensation Back gap compensation O O O O
    Pitch error compensation O O O O
    Spike compensation O O O O
    Temp. Rise compensation O O O O
    2D compensation O O O O
    Operation Handwheel simulation O O O O
    Program empty run O O O O
    Selective stop O O O O
    Segment execution O O O O
    Virtual handwheel O O O O
    Pause point start O O O O
    Tool interrupt point start O O O O
    Tool retract — — — —
    Offset setting O O O O
    Handwheel offset function — — — —
    Program input Selective jump O O O O
    B-STOP/ program end O O O O
    Absolute zero coordinates system (G92/G92.1) O O O O
    Interrupt MACRO (M96/M97) O O O O
    M 198 call subroutine O O O O
    G-code extension O O O O
    High speed high precision Constant Jerk control O O O O
    Cross-segment S-curve acceleration/ deceleration O O O O
    Auto deceleration at corner O O O O
    Corner radius speed limit O O O O
    Multiple high speed high
    precision parameter set    		 — — — —
    User quick parameter — — — —
    SPA function — — — —
    Virtual circle radius function O O O O
    High speed high precision control mode I (G05.1Q1) — — — —
    High speed high precision control mode ii (G05P10000) — — — —
    NURBS interpolation function — — — —
    Tool management Auto tool align screen — — — —
    Auto work measurement O O O O
    Tool lifespan management O O O O
    Auxiliary function Mechanical lock (R-Bit) O O O O
    Software travel limit O O O O
    Spindle speed detection O O O O
    Axial coupling function O O O O
    Axial dynamic coupling function O O O O
    Feedback coupling function O O O O
    Threading quick tool retract O O O O
    Virtual axis function O O O O
    Axle exchange function O O O O
    Axial torque control — O O O
    Serial adjustment function (CNC axis) — O O O
    Driver data display (CNC axis) — O O O
    Spindle adaptation function
    (CNC axis)    		 — O O O
    Serial PLC axis — O O O
    High speed spindle positioning (SYNTEC spindle required) — O O O
    ROT element — O O O
    Dipole foreground/ background
    configuration    		 O O O O
    Data backup and recover O O O O
    Start-up screen customization O O O O
    My favorite (Only support ARM 8-key system) O O O O
    Project protection function O O O O
    Access management O O O O
    Remote AP monitoring O O O O
    Programming Background edit O O O O
    Edit protection O O O O
    Real time syntax check of processing program O O O O
    PLC PLC diagnosis function (FORCE I-
    point)    		 O O O O
    Data transfer function NETWORK O O O O
    FTP O O O O
    RS-485 O O O O
    DNC(Network) O O O O
    DNC(USB) O O O O
    Data display Operation history display O O O O
    Graphic simulation O O O O
    Partial graphic simulation O O O O
    Dynamic multi-language switch- over O O O O
    G-code Oval cutting (clockwise) (G02.1) O O O O
    Parabolic cutting (clockwise) (G02.2) O O O O
    Cylinder interpolation (G07.1) O O O O
    Start-up polar coordinates (G12.1) O O O O
    OD/ID turning cycle (G20) O O O O
    Threading cycle (G21) O O O O
    Intermediate threading feed cycle (G21.2) O O O O
    End face turning cycle (G24) O O O O
    Jump function (G31) O O O O
    Treading (G33) O O O O
    Variable pitch threading (G34) O O O O
    Polygon turning (G51.2) O O O O
    Work coordinates system setting (G54~G59.9) O O O O
    Mirror function (lathe) (G68) O O O O
    Complex turning cycle (G72~G78) O O O O
    Fixing cycle for drilling (G80, G83~G89) O O O O
    Absolute zero coordinates system preset (G92.1) O O O O
    Inverse time feed (G93) — — — —
    Constant surface cutting speed (G96) O O O O
    Spindle synchronization function (G114.1) — O O O
    Spindle load function (G114.3) — O O O
    Option Option-4 Enable Plugin Function O O O O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision
    Option-17 Commercial Vision Software
    Option-18 CAD/CAM
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret Δ Δ Δ
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

0
    0
    Giỏ Hàng
    Giỏ Hàng RỗngTrở Lại Cửa Hàng
    Tiếp Tục Mua Sắm