Hỗ Trợ
Author picture
  • Trang Chủ  
  • 210MA-H, 210MB-H máy phay 8-16 trục dạng truyền thông

210MA-H, 210MB-H máy phay 8-16 trục dạng truyền thông

Category Items Composite Milling
210MA-H 210MB-H 210MA-E 210MB-E 220MA 220MB
Product Specification Max. PLC Controlled Paths 4 4
Max. PLC Controlled Paths 3 3
Standard Axis 8 12 8 12 8 12
Max. Axis (Optional) 9 16 9 16 9 16
Max. Spindle 6 6
Max. Simultaneous Axis Control 4 4 4 4
Min. Control (mm) 0,0001 0,0001 0,0001 0,0001
Max. number of program coordinate 100 100
Max. Number of Table Tools 96 96
Multi-Channel Function Group 4 4
Look-Ahead Blocks no. 2000 2000
Block Processing timT 3000 3000
Hardware Specifications Storage DISKA (MB) 4096 4096
Standard I/O 32/32 32/32 32/32 32/32
Optional I/O 96/96 96/96 96/96 128/128
DA 2 2 2 ─
Monitor (Inch) 10,4 8 10,4 10.4/15
CF Card ─ ─ ─ ─
CF Card 2 2
USB ─ 2 2 ─
RJ-45 1 2
VGA Output 1*** ─ ─ ─
PS/2 ─ ─ ─ ─
RS-232 ─ ─ ─ ─
RS-422 ─ ─ ─ ─
RS-485 1 1
USB ─ ─ ─ 2
SRI 1 1
Servo Control Pulse Train (A/B Phase) ─ ─
Pulse Train (CW/CCW) ─ ─
Mechatrolink II O ─
Mechatrolink III O O
EtherCAT O O
RTEX O O
Compensation Backlash Compensation O O
Pitch Error Compensation O O
Angular Error Compensation O O
Temperature Error Compensation O O
2 Dimension Error Compensation O O
Operation MPG Simulation O O
Dry Run O O
Optional Stop O O
Single Block O O
Virtual MPG O O
Restart at Feedhold O O
Restart at Break Point O O
Tool Return O O
Fixture Offsets O O
MPG Offsets O O
Programming Optional Skip O O
B-Stop O O
Absolute Zero Point Coordinate (G92/G92.1) O O
Interrupt Macro (M96/M97) O O
M198 call Subroutines O O
Expandable G Code O O
HSHP Constant Jerk Control O O
Multiblocks S-curve motion plan O O
Auto declaration in Corner O O
Speed Limit for Round Radius O O
Multiple Sets of HSHP Parameters O O
Quick Parameter Setup O O
SPA Feature O O
Virtual Radius Funciton (for Rotary Axis) O O
HSHP Control Mode I (G05.1 Q1) O O
HSHP Control Mode II (G05P10000) O O
NURBS Interpolation Ability O O
Tool
Management		 Auto Tool Setting O O
Auto Tool Management O O
Tool Life Management O O
Accessibility Machine Lock (R bit) O O
Software Limit O O
Spindle Speed Arrival Check O O
Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Rapid Retraction for Rigid Tapping O O
Virtual Axis Feature O O
Axis Change Feature O O
Axial Torque Limit O O
Serial Bus Setting Feature(CNC Axis) O O
Driver Information Display(CNC Axis) O O
Spindle Application Feature(CNC Axis) O O
Serial Bus PLC Axis O O
ROT Element O O
Dipole Front and Back System O O
Data Backup Recovery O O
Customized Opening Screen O O
My Favorites (Only Eight key system supports) O O
Project Protection Feature O O
Limit Access Manager O O
Remote AP Monitor O O
Edit Background Edit O O
Edit Protection O O
Immediate Grammar Check O O
PLC PLC Diagnosis Feature(FORCE I Point) O O
Data Transfer NETWORK O O
FTP O O
RS-485 O O
DNC(Network) O O
DNC(USB) O O
Information Display Operation CV Display O O
Graphic Simulation O O
Partial Graphic Simulation O O
Dynamic Multi-Language Switch O O
Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ
Feature Coordinate Teach Δ Δ
5 axis feature 5 Axis RTCP (G43.4) ─ ─
Smooth TCP ─ ─
G code command High Precision Locus Control Mode (G05P10000) O O
Smoothing Path Mode (G05.1) O O
NURBS Interpolation (G06.2) O O
Thread Cutting (G33) O O
Auto Tool Measurement (G37) O O
Tool of Offsets (G45~G48) O O
High Speed Peck Drilling Cycle (G73) O O
Left Handed Tapping (G74) O O
High Precision Boring Cycle (G76) O O
Drilling cycling (G81) O O
Chopping (G81.1) O O
Bottom Feed Hold Drilling Cycle (G82) O O
Peck Drilling Cycle (G83) O O
Tapping Cycle (G84) O O
Boring Cycle (G85) O O
High Speed Boring Cycle (G86) O O
Back Boring Cycle (G87) O O
Semi Automatic Finishing Boring Cycle (G88) O O
Bottom Feed Hold Boring Cycle (G89) O O
Multi-Group HSHP Parameter (G120.1) O O
Option Option-4 Enable Plugin Function O O
Option-11 High Precision Contour Control (HPCC) O Δ Δ O
Option-12 Rotation Tool Center Point (RTCP) Δ Δ
Option-13 Feature Coordinate System Δ Δ Δ Δ
Option-14 Parameter learning function
Option-15 Tapping Learning
Option-16Syntec Vision Δ Δ Δ Δ
Option-17 Commercial Vision Software Δ Δ Δ Δ
Option-18 CAD/CAM Δ Δ Δ Δ
Option-19 3D Arc Interpolation Δ Δ
Option-20 Pick and Place (All in one) Δ Δ
Option-21 Four Axis Robot
Option-22 Five Axis Robot
Option-23 Six Axis Robot
Option-24 Gantry Robot Δ Δ
Option-25 Advanced Look-Ahead
Option-26 Smooth Tool Center Point(STCP)
Option-27 Multiple mechanisms for five-axis
Option-28 The 2nd coordinate supports feature coordinate system
Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
Option-31 High Speed Chamfering Contour Control
Option-32 ROT Servo Turret
Option-34 Wood Software
Option-35 3D Laser Scanning
Option-36 Wood Built-In CAM Function

* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half

O Standard function
△ Optional function
– Not available function

Mã: 8268 Danh mục: Thẻ: , , ,

Sản phẩm đa trục chính và hiệu suất cao

-Được trang bị bo mạch chính hiệu suất cao.

-Hỗ trợ giao tiếp truyền thông Mechatrolink-lll.

-Hỗ trợ giao tiếp truyền thông Ethercat & RTEX.

Kiểm soát đường viền chính xác cao (HPCC)

Chức năng HPCC điều chỉnh các khối không liên tục thành một đường cong trơn tru và điều này sẽ nâng cao độ chính xác gia công và giảm sốc cơ học.

Brand

Syntec

Đánh giá

Không có bình luận nào

Hãy là người đầu tiên đánh giá “210MA-H, 210MB-H máy phay 8-16 trục dạng truyền thông”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Sản phẩm liên quan

  • 210MA-H5, 210MB-H5 máy phay 8-16 trục dạng truyền thông

    Category Items Five -Axis
    200MA-5 200MB-5 210MA-H5 210MB-H5 220MA-5 220MB-5
    Product Specification Max. PLC Controlled Paths 4 4 4
    Max. PLC Controlled Paths 3 3 3
    Standard Axis 8 12 8 12 8 12
    Max. Axis (Optional) 9 16 9 16 9 16
    Max. Spindle 6 6 6
    Max. Simultaneous Axis Control 5 5 5 5
    Min. Control (mm) 0,0001 0,0001 0,0001
    Max. number of program coordinate 100 100 100
    Max. Number of Table Tools 96 96 96
    Multi-Channel Function Group 4 4 4
    Look-Ahead Blocks no. 2000 2000 2000
    Block Processing timT 4000 4000 4000
    Hardware Specifications Storage DISKA (MB) 256 4096 4096
    Standard I/O 32/32 32/32 32/32
    Optional I/O 96/96 96/96 128/128
    DA 1 2 ─
    Monitor (Inch) 10.4/15 10,4 10.4/15
    CF Card 1 ─ ─
    CF Card 2 2 2
    USB 2 ─ ─
    RJ-45 2 1 2
    VGA Output 1 1*** ─
    PS/2 1 ─ ─
    RS-232 1 ─ ─
    RS-422 1 ─ ─
    RS-485 1 1 1
    USB 2 ─ 2
    SRI ─ 1 1
    Servo Control Pulse Train (A/B Phase) ─ ─ ─
    Pulse Train (CW/CCW) ─ ─ ─
    Mechatrolink II O O ─
    Mechatrolink III ─ O O
    EtherCAT ─ O O
    RTEX ─ O O
    Compensation Backlash Compensation O O O
    Pitch Error Compensation O O O
    Angular Error Compensation O O O
    Temperature Error Compensation O O O
    2 Dimension Error Compensation O O O
    Operation MPG Simulation O O O
    Dry Run O O O
    Optional Stop O O O
    Single Block O O O
    Virtual MPG O O O
    Restart at Feedhold O O O
    Restart at Break Point O O O
    Tool Return O O O
    Fixture Offsets O O O
    MPG Offsets O O O
    Programming Optional Skip O O O
    B-Stop O O O
    Absolute Zero Point Coordinate (G92/G92.1) O O O
    Interrupt Macro (M96/M97) O O O
    M198 call Subroutines O O O
    Expandable G Code O O O
    HSHP Constant Jerk Control O O O
    Multiblocks S-curve motion plan O O O
    Auto declaration in Corner O O O
    Speed Limit for Round Radius O O O
    Multiple Sets of HSHP Parameters O O O
    Quick Parameter Setup O O O
    SPA Feature O O O
    Virtual Radius Funciton (for Rotary Axis) O O O
    HSHP Control Mode I (G05.1 Q1) O O O
    HSHP Control Mode II (G05P10000) Δ O O
    NURBS Interpolation Ability Δ O O
    Tool
    Management    		 Auto Tool Setting O O O
    Auto Tool Management O O O
    Tool Life Management O O O
    Accessibility Machine Lock (R bit) O O O
    Software Limit O O O
    Spindle Speed Arrival Check O O O
    Axis Synchronize Feature O O O
    Dynamic Axis Synchronize Feature O O O
    Dynamic Axis Synchronize Feature O O O
    Rapid Retraction for Rigid Tapping O O O
    Virtual Axis Feature O O O
    Axis Change Feature O O O
    Axial Torque Limit O O O
    Serial Bus Setting Feature(CNC Axis) O O O
    Driver Information Display(CNC Axis) O O O
    Spindle Application Feature(CNC Axis) O O O
    Serial Bus PLC Axis O O O
    ROT Element O O O
    Dipole Front and Back System O O O
    Data Backup Recovery O O O
    Customized Opening Screen O O O
    My Favorites (Only Eight key system supports) O
    ─    		 O O
    Project Protection Feature O O O
    Limit Access Manager O O O
    Remote AP Monitor O O O
    Edit Background Edit O O O
    Edit Protection O O O
    Immediate Grammar Check O O O
    PLC PLC Diagnosis Feature(FORCE I Point) O O O
    Data Transfer NETWORK O O O
    FTP O O O
    RS-485 O O O
    DNC(Network) O O O
    DNC(USB) O O O
    Information Display Operation CV Display O O O
    Graphic Simulation O O O
    Partial Graphic Simulation O O O
    Dynamic Multi-Language Switch O O O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ Δ
    Feature Coordinate Teach Δ Δ Δ
    5 axis feature 5 Axis RTCP (G43.4) Δ Δ Δ
    Smooth TCP Δ Δ Δ
    G code command High Precision Locus Control Mode (G05P10000) Δ O O
    Smoothing Path Mode (G05.1) O O O
    NURBS Interpolation (G06.2) Δ O O
    Thread Cutting (G33) O O O
    Auto Tool Measurement (G37) O O O
    Tool of Offsets (G45~G48) O O O
    High Speed Peck Drilling Cycle (G73) O O O
    Left Handed Tapping (G74) O O O
    High Precision Boring Cycle (G76) O O O
    Drilling cycling (G81) O O O
    Chopping (G81.1) O O O
    Bottom Feed Hold Drilling Cycle (G82) O O O
    Peck Drilling Cycle (G83) O O O
    Tapping Cycle (G84) O O O
    Boring Cycle (G85) O O O
    High Speed Boring Cycle (G86) O O O
    Back Boring Cycle (G87) O O O
    Semi Automatic Finishing Boring Cycle (G88) O O O
    Bottom Feed Hold Boring Cycle (G89) O O O
    Multi-Group HSHP Parameter (G120.1) O O O
    Option Option-4 Enable Plugin Function O O O
    Option-11 High Precision Contour Control (HPCC) Δ O O
    Option-12 Rotation Tool Center Point (RTCP) Δ Δ Δ
    Option-13 Feature Coordinate System Δ Δ Δ
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ Δ Δ
    Option-17 Commercial Vision Software Δ Δ Δ
    Option-18 CAD/CAM Δ Δ Δ
    Option-19 3D Arc Interpolation Δ Δ Δ
    Option-20 Pick and Place (All in one) Δ Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 220MA, 220MB máy phay 8-16 trục dạng truyền thông

    Category Items Composite Milling
    210MA-H 210MB-H 210MA-E 210MB-E 220MA 220MB
    Product Specification Max. PLC Controlled Paths 4 4
    Max. PLC Controlled Paths 3 3
    Standard Axis 8 12 8 12 8 12
    Max. Axis (Optional) 9 16 9 16 9 16
    Max. Spindle 6 6
    Max. Simultaneous Axis Control 4 4 4 4
    Min. Control (mm) 0,0001 0,0001 0,0001 0,0001
    Max. number of program coordinate 100 100
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 2000 2000
    Block Processing timT 3000 3000
    Hardware Specifications Storage DISKA (MB) 4096 4096
    Standard I/O 32/32 32/32 32/32 32/32
    Optional I/O 96/96 96/96 96/96 128/128
    DA 2 2 2 ─
    Monitor (Inch) 10,4 8 10,4 10.4/15
    CF Card ─ ─ ─ ─
    CF Card 2 2
    USB ─ 2 2 ─
    RJ-45 1 2
    VGA Output 1*** ─ ─ ─
    PS/2 ─ ─ ─ ─
    RS-232 ─ ─ ─ ─
    RS-422 ─ ─ ─ ─
    RS-485 1 1
    USB ─ ─ ─ 2
    SRI 1 1
    Servo Control Pulse Train (A/B Phase) ─ ─
    Pulse Train (CW/CCW) ─ ─
    Mechatrolink II O ─
    Mechatrolink III O O
    EtherCAT O O
    RTEX O O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation O O
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan O O
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters O O
    Quick Parameter Setup O O
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) O O
    HSHP Control Mode I (G05.1 Q1) O O
    HSHP Control Mode II (G05P10000) O O
    NURBS Interpolation Ability O O
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit O O
    Serial Bus Setting Feature(CNC Axis) O O
    Driver Information Display(CNC Axis) O O
    Spindle Application Feature(CNC Axis) O O
    Serial Bus PLC Axis O O
    ROT Element O O
    Dipole Front and Back System O O
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) O O
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) O O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch O O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ
    Feature Coordinate Teach Δ Δ
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) O O
    Smoothing Path Mode (G05.1) O O
    NURBS Interpolation (G06.2) O O
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) O O
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) O O
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC) O Δ Δ O
    Option-12 Rotation Tool Center Point (RTCP) Δ Δ
    Option-13 Feature Coordinate System Δ Δ Δ Δ
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ Δ Δ Δ
    Option-17 Commercial Vision Software Δ Δ Δ Δ
    Option-18 CAD/CAM Δ Δ Δ Δ
    Option-19 3D Arc Interpolation Δ Δ
    Option-20 Pick and Place (All in one) Δ Δ
    Option-21 Four Axis Robot
    Option-22 Five Axis Robot
    Option-23 Six Axis Robot
    Option-24 Gantry Robot Δ Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control
    Option-32 ROT Servo Turret
    Option-34 Wood Software
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6MA, 6MB máy phay 3-4 trục dạng xung

    Category Items Standard
    6MA 6MB 6MA-E 6MB-E
    Product Specification Max. PLC Controlled Paths 2 2
    Max. PLC Controlled Paths 1 1
    Standard Axis 3 4 3 4
    Max. Axis (Optional) 3 4 3 5
    Max. Spindle 1 2 3 4
    Max. Simultaneous Axis Control 3 4 4
    Min. Control (mm) 0,0001 0,0001
    Max. number of program coordinate 32 32
    Max. Number of Table Tools 96 96
    Multi-Channel Function Group 4 4
    Look-Ahead Blocks no. 100 100
    Block Processing timT 300 600
    Hardware Specifications Storage DISKA (MB) 256 512
    Standard I/O 32/32 32/32
    Optional I/O ─ ─
    DA 2 2
    Monitor (Inch) 8 8
    CF Card ─ ─
    CF Card 2 2
    USB ─ ─
    RJ-45 1 1
    VGA Output ─ ─
    PS/2 ─ ─
    RS-232 ─ ─
    RS-422 ─ ─
    RS-485 1 1
    USB ─ ─
    SRI ─
    Servo Control Pulse Train (A/B Phase) O ─
    Pulse Train (CW/CCW) O ─
    Mechatrolink II ─ ─
    Mechatrolink III ─ O
    EtherCAT ─ O
    RTEX ─ O
    Compensation Backlash Compensation O O
    Pitch Error Compensation O O
    Angular Error Compensation O O
    Temperature Error Compensation O O
    2 Dimension Error Compensation ─ ─
    Operation MPG Simulation O O
    Dry Run O O
    Optional Stop O O
    Single Block O O
    Virtual MPG O O
    Restart at Feedhold O O
    Restart at Break Point O O
    Tool Return O O
    Fixture Offsets O O
    MPG Offsets O O
    Programming Optional Skip O O
    B-Stop O O
    Absolute Zero Point Coordinate (G92/G92.1) O O
    Interrupt Macro (M96/M97) O O
    M198 call Subroutines O O
    Expandable G Code O O
    HSHP Constant Jerk Control O O
    Multiblocks S-curve motion plan ─ ─
    Auto declaration in Corner O O
    Speed Limit for Round Radius O O
    Multiple Sets of HSHP Parameters ─ ─
    Quick Parameter Setup ─ ─
    SPA Feature O O
    Virtual Radius Funciton (for Rotary Axis) ─ O
    HSHP Control Mode I (G05.1 Q1) ─ ─
    HSHP Control Mode II (G05P10000) ─ ─
    NURBS Interpolation Ability ─ ─
    Tool
    Management    		 Auto Tool Setting O O
    Auto Tool Management O O
    Tool Life Management O O
    Accessibility Machine Lock (R bit) O O
    Software Limit O O
    Spindle Speed Arrival Check O O
    Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Dynamic Axis Synchronize Feature O O
    Rapid Retraction for Rigid Tapping O O
    Virtual Axis Feature O O
    Axis Change Feature O O
    Axial Torque Limit ─ O
    Serial Bus Setting Feature(CNC Axis) ─ O
    Driver Information Display(CNC Axis) ─ O
    Spindle Application Feature(CNC Axis) ─ O
    Serial Bus PLC Axis ─ O
    ROT Element ─ O
    Dipole Front and Back System ─ ─
    Data Backup Recovery O O
    Customized Opening Screen O O
    My Favorites (Only Eight key system supports) ─ ─
    Project Protection Feature O O
    Limit Access Manager O O
    Remote AP Monitor O O
    Edit Background Edit O O
    Edit Protection O O
    Immediate Grammar Check O O
    PLC PLC Diagnosis Feature(FORCE I Point) ─ O
    Data Transfer NETWORK O O
    FTP O O
    RS-485 O O
    DNC(Network) O O
    DNC(USB) O O
    Information Display Operation CV Display O O
    Graphic Simulation O O
    Partial Graphic Simulation O O
    Dynamic Multi-Language Switch ─ O
    Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) ─ ─
    Feature Coordinate Teach ─ ─
    5 axis feature 5 Axis RTCP (G43.4) ─ ─
    Smooth TCP ─ ─
    G code command High Precision Locus Control Mode (G05P10000) ─ ─
    Smoothing Path Mode (G05.1) ─ ─
    NURBS Interpolation (G06.2) ─ ─
    Thread Cutting (G33) O O
    Auto Tool Measurement (G37) O O
    Tool of Offsets (G45~G48) O O
    High Speed Peck Drilling Cycle (G73) O O
    Left Handed Tapping (G74) O O
    High Precision Boring Cycle (G76) O O
    Drilling cycling (G81) O O
    Chopping (G81.1) ─ ─
    Bottom Feed Hold Drilling Cycle (G82) O O
    Peck Drilling Cycle (G83) O O
    Tapping Cycle (G84) O O
    Boring Cycle (G85) O O
    High Speed Boring Cycle (G86) O O
    Back Boring Cycle (G87) O O
    Semi Automatic Finishing Boring Cycle (G88) O O
    Bottom Feed Hold Boring Cycle (G89) O O
    Multi-Group HSHP Parameter (G120.1) ─ O
    Option Option-4 Enable Plugin Function O
    Option-11 High Precision Contour Control (HPCC)
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System
    Option-14 Parameter learning function
    Option-15 Tapping Learning
    Option-16Syntec Vision Δ
    Option-17 Commercial Vision Software Δ
    Option-18 CAD/CAM Δ
    Option-19 3D Arc Interpolation
    Option-20 Pick and Place (All in one) Δ
    Option-21 Four Axis Robot Δ
    Option-22 Five Axis Robot Δ
    Option-23 Six Axis Robot Δ
    Option-24 Gantry Robot Δ
    Option-25 Advanced Look-Ahead
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis
    Option-28 The 2nd coordinate supports feature coordinate system
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control Δ
    Option-32 ROT Servo Turret Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    * Only sell in Mainland China
    ** Only sell in Taiwan
    *** VGA is only provided in the rear half

    O Standard function
    △ Optional function
    – Not available function

  • 6GA-E máy phay cao tốc 6 trục dạng truyền thông

    Model Item 6GA-E 21GA-E 7GA 22GA
    Axis control Standard. Axis 4 6 4 6
    Max. Axis (Optional) 6 18 6 18
    Max. Spindle 6 6 6 10
    Axis group + PLC axis group 2 4 2 4
    Max. Simultaneous Axis Control Single axis group 4 4 4 4
    Hardware Servo control ECAT/RTEX/M3 ECAT/RTEX/M3 ECAT/RTEX/M3 ECAT/RTEX/M3
    Standard I/O 32/32 32/32 64/64 (RIO) 64/64 (RIO)
    Optional I/O 96/96 96/96 128/128 128/128
    DA 2 2 – –
    Monitor (Inch) 8″ 10.4″ 8″ 10.4″
    DiskC 4GB 4GB 4GB 4GB
    DiskA 4GB 4GB 4GB 4GB
    Front interface CF Card – – – –
    USB 2 2 2 2
    Rear interface RJ-45 O O O O
    VGA – – – –
    RS-232 – – – –
    RS-422 – – – –
    RS-485 O O O O
    USB – – – –
    PS/2 – – – –
    KB O O O O
    HK O O O O
    5V O O O O
    SRI O O O O
    Normal/HPCC 1stCoord: 600/600
    2ndCoord: 600/600
    After opening OP31:
    1stCoord: 1200/1200
    2ndCoord: 1000/1000    		 1stCoord: 4000/4000
    2~4Coord: 1000/1000
    Standard features 1. G5.1
    2. Simultaneous tapping
    3. Fast transmission and fast attack
    4. Tapping and rapid retraction
    5. Multi-spindle simultaneous tapping
    6. Axis exchange function
    7. Overlapping
    9. Single axis group five-axis simultaneous motion function    		 2. Simultaneous tapping
    3. Fast transmission and fast attack
    4. Tapping and rapid retraction
    6. Axis exchange function 7. Overlapping
    10. G120.1 multiple sets of processing conditions    		 2. Simultaneous tapping
    3. Fast transfer and fast attack
    4. Tapping and quick retraction
    6. Axis exchange function
    7. Overlapping
    10. G120.1 multiple sets of processing conditions
    11. G81.1 Chopping
    Option Option-4 Enable Plugin Function O O
    Option-11 High Precision Contour Control (HPCC) O O
    Option-12 Rotation Tool Center Point (RTCP)
    Option-13 Feature Coordinate System Δ
    Option-14 Parameter learning function Δ
    Option-15 Tapping Learning Δ
    Option-16Syntec Vision Δ Δ
    Option-17 Commercial Vision Software Δ Δ
    Option-18 CAD/CAM Δ Δ
    Option-19 3D Arc Interpolation Δ
    Option-20 Pick and Place (All in one) Δ Δ
    Option-21 Four Axis Robot Δ Δ
    Option-22 Five Axis Robot Δ Δ
    Option-23 Six Axis Robot Δ Δ
    Option-24 Gantry Robot Δ Δ
    Option-25 Advanced Look-Ahead Δ
    Option-26 Smooth Tool Center Point(STCP)
    Option-27 Multiple mechanisms for five-axis Δ
    Option-28 The 2nd coordinate supports feature coordinate system Δ
    Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
    Option-31 High Speed Chamfering Contour Control O O
    Option-32 ROT Servo Turret Δ Δ
    Option-34 Wood Software Δ
    Option-35 3D Laser Scanning
    Option-36 Wood Built-In CAM Function

    O Standard function
    △ Optional function
    – Not available function

0
    0
    Giỏ Hàng
    Giỏ Hàng RỗngTrở Lại Cửa Hàng
    Tiếp Tục Mua Sắm