Brand
Syntec
Model: ST3015VK
| Model | Item | 6GB-G |
| Axis control | Standard. Axis | 4 |
| Max. Axis (Optional) | – | |
| Max. Spindle | 2 | |
| Axis group + PLC axis group | 1 | |
| Max. Simultaneous Axis Control | Single axis group | 4 |
| Hardware | Servo control | Pulse |
| Standard I/O | 32/32 | |
| Optional I/O | – | |
| DA | 2 | |
| Monitor (Inch) | 8″ | |
| DiskC | Flash 256MB | |
| DiskA | Flash 256MB | |
| Front interface | CF Card | – |
| USB | 2 | |
| Rear interface | RJ-45 | O |
| VGA | – | |
| RS-232 | – | |
| RS-422 | – | |
| RS-485 | O | |
| USB | – | |
| PS/2 | – | |
| KB | O | |
| HK | O | |
| 5V | O | |
| SRI | – | |
| Normal/HPCC | BPT about 200(CE) | |
| Standard features | 1. G5.1 2. Simultaneous tapping 3. Fast transmission and fast attack 4. Tapping and rapid retraction 5. Multi-spindle simultaneous tapping 6. Axis exchange function 7. Overlapping 9. Single axis group five-axis simultaneous motion function |
|
| Option | Option-4 Enable Plugin Function | |
| Option-11 High Precision Contour Control (HPCC) | ||
| Option-12 Rotation Tool Center Point (RTCP) | ||
| Option-13 Feature Coordinate System | ||
| Option-14 Parameter learning function | ||
| Option-15 Tapping Learning | ||
| Option-16Syntec Vision | Δ | |
| Option-17 Commercial Vision Software | Δ | |
| Option-18 CAD/CAM | Δ | |
| Option-19 3D Arc Interpolation | ||
| Option-20 Pick and Place (All in one) | ||
| Option-21 Four Axis Robot | ||
| Option-22 Five Axis Robot | ||
| Option-23 Six Axis Robot | ||
| Option-24 Gantry Robot | Δ | |
| Option-25 Advanced Look-Ahead | ||
| Option-26 Smooth Tool Center Point(STCP) | ||
| Option-27 Multiple mechanisms for five-axis | ||
| Option-28 The 2nd coordinate supports feature coordinate system | ||
| Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP) | ||
| Option-31 High Speed Chamfering Contour Control | ||
| Option-32 ROT Servo Turret | ||
| Option-34 Wood Software | ||
| Option-35 3D Laser Scanning | ||
| Option-36 Wood Built-In CAM Function |
O Standard function
△ Optional function
– Not available function
O: 標準 Δ: 選修的 -: 不 *台灣地區非賣品
| 模型 | FC-60WA | FC-60PA | *FC-60CB |
| 標準軸
(最大） |
7 (16) | 3 (18) | 4 |
| DA 港 | 2 | 2 | 2 |
| 輸入輸出 | – | ||
| 伺服控制 | M3/ECAT | ||
| VGA | 1 | ||
| 最大主軸數 | 4 | 2 | 4 |
| 貯存 | 4GB | 4GB | 4GB |
| 4軸 RTCP / RTCP | Δ/- | – | – |
| 木材CADCAM | Δ | – | – |
| 電腦應用 | O | O | Δ |
| 控制器類型 | 多軸銑削 | |||||
| 11TB | 200TB – 5 | 210TB – H | 210TB – H5 | 220TB | 220TB – 5 | |
| 軸數 | 8 | 12(16) | 12(16) | 12(16) | ||
| DA | 2 | 1 | 2 | – | ||
| 最大限度 I/O | 128/128 | 96/96 | 96/96 | 128/128 | ||
| 展示 | 10.4” | 8”/10.4” | 8”/10.4”/rear haft | 10.4”/15” | ||
| 通訊類型 | Pulse | M2 | M2/M3/ECAT/RTEX | M3/ECAT/RTEX | ||
| VGA | – | O | O* | – | ||
| 聯繫 | Ethernet RS485 | Ethernet RS232 RS422 RS485 | Ethernet RS485 SRI | Ethernet RS485 SRI | ||
| 多節目 | 2 | 4 | 4 | 4 | 4 | 4 |
| 記憶 | 512MB | 256MB | 4GB | 4GB | 4GB | 4GB |
| 斜面工藝 | △ | – | △ | – | △ | |
| HPCC | △ | – | △ | – | △ | |
* 僅後半部提供 VGA ○ 標準－ 不支援 △ 選修的
| Type | LRA906-7-6A-R(Standard)
/LRA906-7-6H-R(Hollow style） |
|
| No. Control Axes | 6 | |
| Payload(kg) | 7kg | |
| Max. Reach (mm) | 906 | |
| Pos. Rep.(mm） | ±0.03 | |
| Motion Range (°) | J1 | ±170 |
| J2 | +135/-96 | |
| J3 | +65/-195 | |
| J4 | ±170 | |
| J5 | ±120 | |
| J6 | ±360 | |
| Motor Output (kw) | J1 | 0.75 |
| J2 | 0.75 | |
| J3 | 0.4 | |
| J4 | 0.2 | |
| J5 | 0.1 | |
| J6 | 0.1 | |
| Max. Speed* (°/s) | J1 | 335 |
| J2 | 355 | |
| J3 | 335 | |
| J4 | 480 | |
| J5 | 450 | |
| J6 | 705(6A)/900(6H) | |
| Weight (kg) | ≈52 | |
| Installation | Floor, Upside-down, Angle | |
| Levels of protection | IP54/IP67 | |
| Ambient temperature / Humidity / Vibration | Ambient temperature：0～45℃
Ambient humidity: Normally 20~80 %RH or less(No dew. nor frost allow)Short term 90 %RH or less (within one month) Vibration acceleration: 4.9 m/s2(0.5G) or less |
|
 |
 |
| Robot Workspace | Robot Base Dimension |
 |
 |
| LRA906-7-6A-R Robot Flange Dimension | LRA906-7-6H-R Robot Flange Dimension |
 |
|
| Wrist Load |
Features
Applications
 |
 |
 |
| Handing | Loading/Unloading | Assembling |
 |
 |
|
| Grinding/Polishing | Others |
Đánh giá
Không có bình luận nào